Specifications

SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA 98005 USA
P.O. Box 3526, 98009 Fax: [phone] Tel: [phone] or 1-800-259 7331
E-mail: [e-mail] Web site: http://www.sgcworld.com
© 2000 SGC Inc
SG-231 Manual
4. When connecting the coupler to the radio/transceiver, a passageway for the control cable
(consisting of an RG-58 coax cable, control wire, power, and ground, plus the optional tuned indi-
cator wire) will need to be provided.
Note: By removing the four screws for the ratchet mount base of the SG-303 antenna, the mount
can be installed or reinstalled to provide the user with the set-up most suitable for the application.
Insure the screws are tightly secured after reinstallation.
5. Once a location for the QMS has been selected, mounting becomes a simple task. The QMS
enclosure mounts in virtually any attitude and the straps can be moved to either side of the enclo-
sure to accommodate the vehicle (see Figures A-1, A-2, and A-3 for typical installations).
Figure A-2—Side view of QMS installation on the side of a small van