User`s manual

4 CMX34GS cpuModule BDM-610000082 Rev A
Ordering Information
The CMX34GS cpuModule is available with a selection of processors and memory sizes. The cpuModule can also
be purchased as part of an Intelligent Data Acquisition Node (IDAN™) building block, which consists of the
cpuModule and a milled aluminum IDAN frame. The IDAN building block can be used in just about any
combination with other IDAN building blocks to create a simple but rugged PC/104 stack. Refer to Appendix C,
IDAN™ Dimensions and Pinout, for more information. The CMX34GS cpuModule can also be purchased as part
of a custom-built RTD HiDAN™ or HiDANplus High Reliability Intelligent Data Acquisition Node. Contact RTD
for more information on its high reliability PC/104 systems.
CMX34GS Model Options
The basic cpuModule model options are shown below. Refer to the RTD website (www.rtd.com) for more
detailed ordering information and any new variations that may be available.
Cable Kits and Accessories
For maximum flexibility, RTD does not provide cables with the cpuModule. You may wish to purchase the
CMX34GS cpuModule cable kit (P/N XK-CM109), which contains:
• Utility Port 2.0 multi-function cable (2x USB 2.0 ports, battery, reset button, power button, speaker)
• Two serial port cables (DIL-10 to DSUB-9)
• VGA monitor cable (DIL-10 to high density 15-pin DSUB)
• aDIO cable (DIL-16 to DSUB-25)
• Four USB cables (5-pin SIL to USB A)
• PCIe/104 Type 2 break-out board (provides standard PC interfaces for SATA and USB devices)
• Two Ethernet cables (DIL-10 to RJ-45)
For additional accessories, refer to the RTD website.
Table 1 CMX34GS cpuModule Model Options
Part Number Description
CMX34GSS615HR-2048 AMD G-Series, Single Core 615 MHz, 2GB DDR3-SDRAM
CMX34GSD1000HR-2048 AMD G-Series, Dual Core 1 GHz, 2GB DDR3-SDRAM