Owner`s manual

Please note: the connection hose and the chain are part of the

installation not part of the cooker. They should be provided by

your installer and are available at most builders merchants.

The safety chain must be installed in order to:

Prevent the gas hose from being accidentally damaged when the

cooker is moved for cleaning.

Prevent the cooker from falling over if an excessive weight is pla-

ced on the open oven door.

The chain must be anchored to the wall behind the cooker, in a cen-

tral position with respect to the width of the appliance, in the fol-

lowing manner:

Firmly secure a hook “A” to the wall behind the cooker, on the same

level with the fixing points of chain “C”.

Fix chain “C” using the screws “B” situated at the back of the

cooker (fig. 49).

After having prepared the chain as above, attach in to the hook “A”.

WARNING:

The installer must ensure scrupulous observance of the above

points. The manufacturer declines all responsibility deriving

from failure to observe these recommendations.

fig. 44

Additional notes

for assembling a safety chain