Instruction manual for downdraft hood Model code: DD520BK Contact Caple on 0844 800 3830 or for spare parts www.4caple.co.
EN The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
EN CONTENTS 1/ TO THE ATTENTION OF THE USER - Safety instructions - Description of the applianc 4 5 2 / INSTALLING THE HOOD - Mounting the hood - Removal of the filter cartridge - Mounting the filter cartridge - Electrical hook-up of the hood 6 7 7 8 3 / HOW THE HOOD WORKS 9 4 / CLEANING THE HOOD 11 5 / OPERATIONAL ANOMALIES 12 6 / AFTER SALES SERVICE 12 3
1/ TO THE ATTENTION OF THE USER EN Important: keep these instructions for use with the appliance. If the appliance should be sold or passed on to others, make sure that the instructions are passed on with it. We thank you for taking note of these suggestions before installing and using the appliance. They have been written for your personal safety and the safety of others. - SAFETY INSTRUCTIONS These hoods have been designed for personal use in the home. The appliance must be used by adults.
1/ TO THE ATTENTION OF THE USER - DESCRIPTION OF THE APPLIANCE 5 EN
EN 2/ INSTALLING THE HOOD 1) Before installing the appliance, make sure that none of the parts is damaged in any way. In case of damaged parts, contact your retailer and do not proceed with installation. Read all of the following instructions with care before installing the appliance. - Use an air outlet pipe of the shortest possible length. - Limit the number of pipe bends. - Use a material approved by standards and regulations.
UTILISATION This product is intended to extract fumes, fats, and steam from cooking. It has been designed and made for use either in the suction or filter versions. VERSION EVACUATION exterieure The hood is equipped with an air outlet to convey smoke outwards (the flue pipe and fixing flange are not supplied). Check valve blockage Warning: Before connecting the air exhaust hose, make sure that the check valves are free to turn over freely.
- ELECTRIAL HOOK UP OF THE HOOD WARNING: Place the metal box containing the electronic components at a distance of no less than 65 cm from gas-operated cook tops or in any case, 65 cm from the extraction point of the hood. RECOMMENDATION: We recommend installing the metal box containing the electronic components at least 10 cm above floor level and at a suitable distance from all heat sources (e.g. oven sides or cook top). This appliance is fitted with an H05 VVF 3 conductor, 0.
EN 3/ HOW THE HOOD WORKS Model SDD3 STANDARD VERSION (Fig. 22) A: Extraction panel down/OFF switch This serves to close the extraction panel either completely or in intermediate positions above 180 mm from the cook top. When the extraction panel is being closed, it will remain in operation until it reaches 180 mm above the cook top. Below this height, the extraction function will switch off automatically.
Other functions: - After 30 hours of appliance operation, the pushbutton panel indicates saturation of the grease filters by the buttons flashing. To reset, press the timer button. - After 4 hours of continuous operation from the last setting, the appliance turns off and closes automatically. - When the front panel is removed for cleaning and maintenance operations, all the electronic aspiration and movement functions are locked.
EN 4/ CLEANING THE HOOD Careful maintenance helps guarantee proper operation and good results from an appliance over time. The hood must be unplugged from the electrical power source, both by unplugging the appliance from the socket as well as de-activating the breaker, before removing the metal filters. After cleaning, you must replace the metal filters as outlined in the instructions.
EN 5/ OPERATIONAL ANOMALIES SYMPTOM SOLUTION Check that: The hood does not • there is not a power outage. work... • a specific speed has actually been selected. Check that: • the motor speed selected is sufficient for the quantity of fumes The hood has low steam present. output... • the kitchen is ventilated well enough to allow for air intake. • the carbon filter is not worn (hood n recirculation mode). The hood stops in Check that: the middle of ope- • there is not a power outage.
1 2 3 4 5 6 13
Pu sc h 7 8 9 10 11 14
12 13 14 14 bis 15 15
17 18 19 20 21 16
A B C D 22 17 E F
9 2 2 422 - M 2 12
