Instruction manual for Mistral Island hood Model code: Mi360 Contact Caple on 08448003830 or for spare parts www.4caple.co.
������� A Fig.1 ��� ��� �������� � � � � � � � � � � � � � Fig.
� ������������������� ��� ��� � � ��� � � ��� � � Fig.3 � ������ � � � � � � � � � Fig.
� � � � � � � � �� Fig.6 � � � � � � � � Fig.7 Fig.5 � � � Fig.8 -5- Fig.
� �� �� � � � ������ � �� � � � � � � Fig.
� � � � � � Fig.11 Fig.12 � � � � � � � � � � � Fig.13 � � Fig.
� � � � � � � Fig.
ENGLISH GENERAL GB The symbol on the product or on the accompanying paperwork indicates that the appliance should not be treated as domestic waste, but should be delivered to a suitable electric and electronic appliance recycling collection point. Follow local guidelines when disposing of waste. For more information on the treatment, re-use and recycling of this product, please contact your local authority, domestic waste collection service or the shop where the appliance was purchased.
ance’s control panel (Fig. 2.1). Drill 5 Ø8 holes in the ceiling and tighten 3 screws E without tightening them completely making sure that the screws are not inserted in the holes marked with an X on the drill hole template (the screws and anchors must be suitable for the type of wall). - Take structure B (Fig. 2.2) and insert it on the 3 screws that have not been tightened completely, in correspondence of the 3 slots. Make a small rotation to lock it in (Fig. 2.2).
for the 3rd speed. In order to activate the intensive speed, press the button for 5 seconds regardless of the status of the hood. For each speed only the led indicating the set speed will turn on. The intensive speed is indicated by the flashing of the led indicating speed 3. The duration of the intensive speed is 10 minutes; after this time the hood goes back to the last set speed.
- 13 -
- 14 -
- 15 -
3LIK0759