User manual

PreparationPreparation

Preparation

iÉÑíLoáÖÜí=aççê=léÉåáåÖiÉÑíLoáÖÜí=aççê=léÉåáåÖ

iÉÑíLoáÖÜí=aççê=léÉåáåÖ

The door of the refrigerator can be opened both from the left or

right as required. The following are the steps required to

position the door to open to the right.

1. Firmly hold the refrigerator door and remove the

screws from the right lower hinge. Remove the door

and place aside. Remove the lower pivot pin and

install it in the left lower hinge hole.

2. Remove the middle hinge and the washer on the

middle connection and then the freezer door. Put the

door aside.

3. Remove the upper right hinge cover and the hinge

screws. Install the right upper hinge cover.

4. Fix the left upper hinge to the left side and then the

left upper hinge cover.

5. Mount the refrigerator door to the left of the housing

with the middle hinge connected.

6. Mount the refrigerator door with the top left hole on

the down pivot pin of the middle hinge.

7. After installation, open and close the door several

times and fix tighten the hinge screws when the door

operates normally.

Lower hinge

Lower pivot pin

Lower pivot pin hole

Pivot pin hole

Middle pivot pin

Washer

Middle hinge

Hole stoppers

Middle pivot pin

Washer

Middle hinge

Lower hinge

Lower pivot pin

Upper hinge

Hinge cover