Instruction manual

19
7
WASH/DRY PROGRAM STATUS AND POWER CUTS
using the appliance and practical tips
PROGRAMME
PHASES
Once started, current programme status and
time remaining till completion can be
ascertained from the screen.
The active phases will appear successively at
the top of the display as the programme
progresses. The time remaining until the end
of the programme will also appear on the
display. It updates at regular intervals, but not
minute by minute.
Any option button can be selected provided
the wash phase in which it takes effect has
not been passed and when the programme
accepts the option.
Pressing the start/stop button during the wash
activates the PAUSE function.
POWER CUTS
If there is a power cut, the washing machine
will continue to operate from the point at which
it stopped when power is reconnected (its
memory lasts for a few hours).
warnings
Level the washing machine by adjusting the
feet to reduce the noise caused by spin-drying.
Try and wash clothes of different sizes in
the same wash programme to favour the
distribution of the clothes inside the drum
during spin-drying.
All the models have a safety system for
spin-drying that prevents spin-drying from
being carried out if the distribution of the
clothes inside the drum is too concentrated.
This prevents the appliance from vibrating too
much.
If you find that the clothes are not properly
wrung out, try spin-drying them again after
having distributed the clothes more evenly in
the drum.
If the programme is changed on the
selector dial during the washing and
drying process, the washer-dryer will
go onto PAUSE status and the
programme will be cancelled.
If you need to add or remove a
garment, press the start/stop button
and make sure that the water level is
not above the door overflow level and
that the temperature inside is not
high. Press the start/stop button again
to restart the wash from the same
cycle phase it had stopped at.
Important