Programmable Water Kettle with Variable Temperature Control Model #274.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be taken, including the following: 1. READ ALL INSTRUCTIONS. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons, DO NOT IMMERSE CORD, PLUG, OR POWER BASE UNIT in water or other liquids. 4. Close supervision is necessary when any appliance is used by or near children.
a. Illuminated display Timer symbol with 3 second boil setting (default) Chlorine setting (default) timer symbol b. -/+ buttons to select temperature and timer Fig. 3c c. Program button Fig. 3d d. On/Off button Fig. 2 CAUTION! Default setting Keep warm setting (default) kettle symbol keep warm symbol Fig. 3a • Never boil water while the lid is open. Hot steam may cause injuries and may damage wooden panels in your kitchen. • Never try to remove the lid.
BEFORE USING FOR THE FIRST TIME 3. TURNING THE KETTLE OFF Read all Important Safeguards and Operating Instructions before using this kettle. Discard the first filling of boiling water to remove any dust and residues from the manufacturing process. There are two ways to turn off the kettle: 1) During operation, push the On/Off button. This will not erase any programmed settings as long as the kettle sits on the base. 2) During operation, lift the kettle off the base.
Please note: The keep warm temperature cannot be set higher than the selected heating temperature, i.e. if the selected heating temperature is set to 160ºF, the keep warm temperature can be set between 110ºF and 160ºF. Please note: If the selected heating temperature is set to 212ºF or 200ºF degrees the keep warm temperature cannot be set higher than 190ºF. After the selected heating temperature is reached, the display will now change to the preselected keep warm temperature.
8. DECALCIFICATION Hard water can leave calcium spots inside the kettle that can slow down boiling time. Use a commercial descaling agent, like Capresso Cleaning Solution and follow the instructions that come with the agent. NOTE: Make sure kettle is cold. Use of Capresso Cleaning Solution Dissolve 1 oz (28 g) of Capresso Cleaning Solution with 32 oz (1 L) of water and pour mixture into kettle. Allow mixture to sit inside the kettle for 20-30 minutes.
Customer Service 1-800-767-3554 Mon-Thu 8AM – 9PM • Fri 8AM – 8PM • Sat 9AM – 5PM Eastern Time Zone contact@capresso.com JURA Inc. 20 Craig Road, Montvale, NJ 07645 201-767-3999 • Fax: 201-767-9684 Website: www.capresso.
