The IMPRESSA Z5 – Generation II Manual The ‘IMPRESSA Manual’ has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its easy-to-understand style, its thoroughness and coverage of safety aspects.
Table of contents Your IMPRESSA Z5 IMPORTANT SAFEGUARDS 4 8 Control elements and accessories 10 Proper use For your safety 10 The IMPRESSA Z5 Manual 13 Model variants ..............................................................................................................................................14 Symbol description ......................................................................................................................................
Table of contents Pre-ground coffee .......................................................................................................................................45 Hot milk ........................................................................................................................................................46 Hot water .....................................................................................................................................................
Important Safeguards IMPORTANT SAFEGUARDS These safeguards apply for machines with UL safety test (see rating plate and chapter 14, ‘Technical data’). Follow the basic safety precautions When using electrical appliances, basic safety precautions should always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Z Read all instructions. Z Do not touch hot surfaces. Use handles or knobs.
Important Safeguards Special cord set instructions a. A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a long cord. Your IMPRESSA has a 3-pin grounded plug. b. Longer extension cords are available and may be used if care is exercised in their use. c. If an extension cord is used, 1. the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, and 2.
Important Safeguards Z Z NEVER DO (or you will void your warranty protection): Z Z Z Z 6 Keep your hands and the cord away from hot parts of the appliance during operation. Never clean with scouring powders or hard implements. Never fill instant coffee, chocolate mix etc. into the grinder or ground coffee funnel (grunder by-pass). It will damage the functioning of the brewing chamber. Never fill sugar coated coffee beans into the bean hopper. In case of doubt, call your dealer.
Important Safeguards 7
Control elements and accessories Control elements and accessories 1 9 2 10 3 11 4 12 13 5 6 7 14 8 Figure: IMPRESSA Z5 – Generation II Alu 1 2 3 4 5 6 7 8 8 Bean container cover Water tank cover Water tank Power switch and power cable (side) One Touch Cappuccino nozzle, long spout One Touch Cappuccino nozzle, short spout Coffee grounds container Drip tray 9 10 11 12 13 14 Grinding wheel Bean container with aroma preservation cover Filler funnel for pre-ground coffee Height-adjustable coffee spo
Control elements and accessories 1 4 5 6 7 Top of the machine 1 Q On/off button 2 f Rotary Switch 3 c Maintenance button 2 3 8 9 Front 4 z 5 q 6 p 7 e 8 9 m 10 u 11 i 12 o 10 11 12 Milk button Latte macchiato button Cappuccino button Special Coffee button Display Hot water button Ristretto button Espresso button Coffee button 9
Important information Proper use The machine has been designed and built for domestic use. It should only be used to prepare coffee and to heat milk and water. Use for any other purpose will be deemed improper. JURA cannot accept any responsibility for the consequences of improper use. Keep this manual close to the IMPRESSA and, if appropriate, pass it on to the next user. For your safety Please read and note carefully the following important safety information.
Important information Z Be careful to ensure that the appropriate nozzle is installed and clean. The nozzle or parts of the nozzle might come off if the parts are not assembled correctly or a blockage occurs. A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire: Z Never allow the power cable to loosely hang down. The power cable can be tripped over or damaged.
Important information Safe handling of the CLARIS plus filter cartridges: Z CLARIS plus filter cartridges should be kept out of the reach of children. Z Store them dry in the sealed package. Z Protect them from heat and direct sunlight. Z Do NOT use damaged CLARIS plus filter cartridges. Z Do NOT open CLARIS filter cartridges.
The IMPRESSA Z5 Manual The IMPRESSA Z5 Manual You are holding the manual for your IMPRESSA Z5 in your hand. It will help you to familiarize yourself with your IMPRESSA safely and quickly and teach you the full range of facilities it offers. Chapter 2, ‘Preparing and using your IMPRESSA for the first time’, explains step-by-step how to set up and prepare the IMPRESSA.
Model variants The IMPRESSA Z5 – Generation II Manual covers all Z series IMPRESSAmodels. Symbol description Warnings CAUTION CAUTION Always take note of any information marked with the CAUTION or WARNING symbol. The signal word WARNING points out potential risk of serious injury, and the signal word CAUTION potential risk of slight injury. The CAUTION symbol is used to draw attention to circumstances which could cause the machine to become damaged.
Welcome to the world of IMPRESSA! Welcome to the world of IMPRESSA! Dear customer, We thank you for the trust that you have placed in us by purchasing a JURA IMPRESSA coffee machine. The machines, which are produced in Switzerland, have already impressed independent, critical testers of goods and design award juries.
1 IMPRESSA Z5 – ‘Two at once’ 1 IMPRESSA Z5 – ‘Two at once’ Coffee that fulfils your wildest dreams 16 Coffee specialities are extremely popular. An increasing number of perfect hosts treat themselves, friends and families to a wide range of coffee specialities in the comfort of their own homes.
1 IMPRESSA Z5 – ‘Two at once’ Z JURA on the Internet Active bean monitoring: The IMPRESSA Z5 banishes the sound of empty rotating coffee grinders and half-full cups once and for all. It always shows you when the coffee beans need replenishing in good time. The filling level of the bean container is continuously monitored optically. Visit us on the Internet. @ At www.jura.com you will find interesting and up-to-date information on your IMPRESSA and on every aspect of coffee.
2 Preparing and using your IMPRESSA for the first time 2 Preparing and using for the first time This chapter provides you with the information you need to use your IMPRESSA without any problems. You will prepare your IMPRESSA step-by-step for your first coffee experience.
2 Preparing and using your IMPRESSA for the first time T Remove the water tank and rinse it with cold water. T Fill the water tank with fresh, cold mains water and reinsert. Filling the bean container The bean container has an aroma preservation cover. This will ensure that your coffee beans retain their aroma for longer. CAUTION Coffee beans which have been treated with additives (e.g. sugar), pre-ground or freeze-dried coffee will damage the grinder.
2 Preparing and using your IMPRESSA for the first time k T Press the Rotary Switch to confirm the language. CONFIRMED √ appears briefly on the display to confirm the setting. TIME HOURS --:-g T Turn the Rotary Switch to set the hour. TIME HOURS 12:00 (Example) k T Press the Rotary Switch to confirm the hour setting. TIME MINUTES 12:00 g T Turn the Rotary Switch to set the minutes. TIME MINUTES 12:45 (Example) k T Press the Rotary Switch to confirm the minute setting.
2 Preparing and using your IMPRESSA for the first time E When a coffee speciality has been prepared for the first time, it is possible that FILL BEANS appears on the display as the grinder has not yet been completely filled with coffee beans. In this case prepare a different coffee speciality. Using and activating filter Your IMPRESSA no longer has to be descaled if you use the CLARIS plus filter cartridge. @ You can also try out the ‘Insert filter’ operation online. Visit the Knowledge Builder at www.
2 Preparing and using your IMPRESSA for the first time T Lift the cartridge holder and insert the filter cartridge into the water tank, applying slight pressure. T Close the cartridge holder. It will click into place audibly. T Fill the water tank with fresh, cold water and reinsert. T Place a receptacle (containing at least 500 ml) under the cappuccino nozzle. T Turn the selection lever of the nozzle to the steam position n. c T Press the maintenance button. FILTER RINS.
2 Preparing and using your IMPRESSA for the first time T Wait for about one minute. T You will then be able to read the degree of water hardness from the discolouration of the Aquadur® test strip and the description on the packaging. You can now adjust the water hardness. Example: To change the water hardness from 16° dH to 25° dH, proceed as follows: Precondition: COFFEE READY is shown on the display. k T Keep the Rotary Switch pressed until MAINTENANCE appears.
2 Preparing and using your IMPRESSA for the first time Example: To change the fineness of grind during coffee preparation, proceed as follows: T Open the cover of the bean container. T Place a cup under the coffee spout. o T Press the Coffee button. The grinder starts and 1 COFFEE appears on the display. After this, the coffee strength is briefly displayed. T Turn the grinding wheel to the desired position while the grinder is running. The coffee will be prepared and the fineness of grind is adjusted.
2 Preparing and using your IMPRESSA for the first time Switching off (Standby) When you switch your IMPRESSA off, the spouts with which a coffee speciality or milk have been prepared are rinsed. T Place a receptacle under the coffee spout and the cappuccino nozzle. Q T Press the On/Off button. E When you prepare a milk product, but have not performed cappuccino cleaning, CLEAN MILK SYSTEM appears and the maintenance button lights up.
3 Familiarising yourself with the control options 3 Familiarising yourself with the control options With the IMPRESSA you can prepare an excellent coffee or milk speciality at the touch of a button. You also have the option of adjusting the coffee strength and temperature as well as the amount of water to your personal taste. This chapter will allow you to become familiar with all control options with the aid of examples.
3 Familiarising yourself with the control options Preparing a coffee speciality at the touch of a button Example: Proceed as follows to prepare one espresso. Precondition: COFFEE READY is shown on the display. T Place an espresso cup under the coffee spout. i T Press the Espresso button. 1 ESPRESSO and the coffee strength is displayed. The pre-set amount of water flows into the cup and the process stops automatically. COFFEE READY is shown on the display.
3 Familiarising yourself with the control options Changing the coffee strength before preparation Example: Proceed as follows to prepare a strong cup of coffee. Precondition: COFFEE READY is shown on the display. T Place a cup under the coffee spout. g T Turn the Rotary Switch until STRONG appears on the display. o T Press the Coffee button for as long as STRONG is displayed. 1 COFFEE / STRONG. The pre-set amount of water flows into the cup. Preparation stops automatically.
3 Familiarising yourself with the control options u T Press and hold the Ristretto button. 1 RISTRETTO and the coffee strength is displayed. u T Hold the Ristretto button down until ENOUGH? / PRESS BUTTON appears. u T Release the Ristretto button. Coffee preparation starts and the ristretto flows into the cup. T Press any button as soon as enough ristretto has flowed into the cup. Preparation stops automatically. CONFIRMED √ appears briefly on the display.
3 Familiarising yourself with the control options Programme item Subitem Explanation HARDNESS NOT ACTIVE, 1° dH – 30° dH T Adjust the water hardness. ENERGY ESM SAVE NO, SAVE LEVEL1, SAVE LEVEL2 T Select an energy saving mode. TIME --:-- T Set the time and weekday. UNIT ON --:-MTWTFSS T Set the switch-on and switch-off time individually for each weekday. OFF AFTER T Set the number of hours after which the NOT ACTIVE, 0.5 HRS – 15 HRS IMPRESSA should switch off automatically.
3 Familiarising yourself with the control options Settings in programming mode always follow the same model. Example: To change the strength of one espresso from NORMAL to STRONG proceed as follows: Precondition: COFFEE READY is shown on the display. k T Keep the Rotary Switch pressed until MAINTENANCE appears. g T Turn the Rotary Switch until PRODUCTS is displayed. k T Press the Rotary Switch to enter the programme item.
3 Familiarising yourself with the control options g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode.
3 Familiarising yourself with the control options 33
4 Recipes 4 Recipes You can use your IMPRESSA to create coffee classics or extraordinary specialities in your home. You can find additional coffee recipes online at www.jura.com. Further information on how to operate your IMPRESSA can be found in Chapter 3, ‘Familiarising yourself with the control options’. Cappuzino Ingredients (for two people) T T T 200 ml cold milk 2 strong Espressi 20 ml cinnamon syrup Powdered cinnamon for decoration purposes Distribute the cinnamon syrup into Cappuccino cups.
4 Recipes 35
4 Recipes 36
4 Recipes 37
4 Recipes 38
4 Recipes Winter’s dream coffee Ingredients (for two people) T T T T 2 strong Espressi 200 ml of hot cocoa 1 pinch of gingerbread seasoning 100 ml milk Sugar to suit personal taste 1-2 gingerbread cakes for decoration Prepare 2 Espressi. Stir Espresso with cocoa and gingerbread seasoning and distribute into two glasses. Froth the milk and add to the Espressos. Sprinkle with small pieces of gingerbread.
5 Preparation at the touch of a button 5 Preparation at the touch of a button In this chapter you will find out how to prepare coffee specialities, milk and hot water without making further settings. Chapter 3, ‘Familiarising yourself with the control options’, will teach you how to adjust the settings to your personal preferences. Alternatively, you can use Chapter 6, ‘Permanent settings in programming mode’.
5 Preparation at the touch of a button Z Z tion. Select a finer grind for espresso than for coffee. The fineness of grind affects the time the water requires to run through the coffee powder. A finer coffee powder prolongs the extraction time so that the maximum aroma is unfolded when espresso is prepared. Temperature: In programming mode on the IMPRESSA you can adjust the temperature of the coffee specialities.
5 Preparation at the touch of a button Espresso The classic coffee drink from Italy. There is a definite crema on the surface of the espresso. Example: This is how to prepare an espresso. T Place an espresso cup under the coffee spout. i T Press the Espresso button. 1 ESPRESSO and the coffee strength is then briefly displayed. The pre-set amount of water flows into the cup. Preparation stops automatically. COFFEE READY appears on the display. Coffee Example: This is how to prepare a coffee.
5 Preparation at the touch of a button T Attach the milk pipe to the nozzle. T Insert the other end in a milk carton/bottle or connect it to the vacuum milk container. T Place a cup under the cappuccino nozzle. T Turn the selection lever of the nozzle to the milk foam position p. p T Press the Cappuccino button. 1 CAPPUCCINO and the coffee strength is displayed. 1 CAPPUCCINO / MILK, the milk foam is being prepared. The operation stops automatically after reaching the pre-set amount of milk.
5 Preparation at the touch of a button T Place a glass under the cappuccino nozzle. T Turn the selection lever of the nozzle to the milk foam position p. E To enable the typical layers of a Latte Macchiato to form even more effectively, add 10 ml of cool milk to the glass before preparing this speciality. E You can refine your Latte Macchiato even more by also adding a little flavoured syrup to the glass as well. q T Press the Latte Macchiato button. 1 LATTE MAC. and the coffee strength is displayed.
5 Preparation at the touch of a button Pre-ground coffee You can choose a second coffee blend with the filler funnel for preground coffee. E Never add more than two level measuring spoons of preground coffee. E Use pre-ground coffee which is not ground too finely. Very fine coffee can block up the system so that the coffee only comes out in drips. E If you did not fill the machine with a sufficient amount of preground coffee, PRE-GROUND / NOT ENOUGH is displayed and the IMPRESSA stops operation.
5 Preparation at the touch of a button Hot milk Precondition: COFFEE READY is shown on the display. T Remove the milk pipe from the packaging of the vacuum milk container. For a milk carton/bottle use the long pipe, for the vacuum milk container the short pipe. T Attach the milk pipe to the nozzle. T Insert the other end in a milk carton/bottle or connect it to the vacuum milk container. T Place a cup under the cappuccino nozzle. T Turn the selection lever of the nozzle to the milk position t.
5 Preparation at the touch of a button The pre-set amount of water flows into the cup. Preparation stops automatically. COFFEE READY appears on the display.
6 Permanent settings in programming mode 6 Permanent settings in Programming mode Products With the PRODUCTS programme item you can enter individual settings for all coffee products, milk, hot water and coffee-milk products. Settings for coffee products, milk and hot water The following permanent settings can be entered for coffee products, milk and hot water: Product Temp.
6 Permanent settings in programming mode E For 1 milk and 1 special coffee you can also select whether the preparation of 2 milks or 2 special coffees should be doable or not doable. Settings for coffee-milk-products The following permanent settings can be entered for coffee-milk products: Product Temp.
6 Permanent settings in programming mode Permanent settings in programming mode always follow the same model. Example: Proceed as follows to change the amount of milk of 1 latte macchiato from 16 SECS to 20 SECS, the pause from 30 SEC to 40 SEC and the amount of water from 45 ML to 40 ML. Precondition: COFFEE READY is shown on the display. k T Keep the Rotary Switch pressed until MAINTENANCE appears. g T Turn the Rotary Switch until PRODUCTS is displayed.
6 Permanent settings in programming mode g T Turn the Rotary Switch until 1 LATTE MAC. / PAUSE 30 SEC is displayed. k T Press the Rotary Switch to enter the programme item. 1 LATTE MAC. / PAUSE 30 SEC g T Turn the Rotary Switch until 1 LATTE MAC. / PAUSE 40 SEC is displayed. k T Press the Rotary Switch to confirm the setting. CONFIRMED √ appears briefly on the display. 1 LATTE MAC. / PAUSE 40 SEC g T Turn the Rotary Switch until 1 LATTE MAC. / EXIT is displayed.
6 Permanent settings in programming mode Example: Proceed as follows to change the energy saving mode from ENERGY SAVE NO to ENERGY LEVEL1. Precondition: COFFEE READY is shown on the display. k T Keep the Rotary Switch pressed until MAINTENANCE is displayed. g T Turn the Rotary Switch until ENERGY ESM is displayed. k T Press the Rotary Switch to enter the programme item. ENERGY SAVE NO g T Turn the Rotary Switch until ENERGY SAVE LEVEL1 is displayed. k T Press the Rotary Switch to confirm the setting.
6 Permanent settings in programming mode k T Press the Rotary Switch to confirm the weekday setting. CONFIRMED √ appears briefly on the display. TIME 09:50 g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode. COFFEE READY Programmable Switch-on time The programmable switch-on time can only be set when the time has been set. The following settings can be made in the UNIT ON menu item: Z UNIT ON U Set the required switch-on time.
6 Permanent settings in programming mode g T Turn the Rotary Switch until UNIT ON / MINUTES 07:30 is displayed. k T Press the Rotary Switch to confirm the minute setting. CONFIRMED √ appears briefly on the display to confirm the setting. UNIT ON 07:30 g T Turn the Rotary Switch until DAY is displayed. k T Press the Rotary Switch to enter the programme item. DAY / MON YES g T Turn the Rotary Switch until TAG / SUN YES is displayed. k T Press the Rotary Switch to enter the programme item.
6 Permanent settings in programming mode Example: Proceed as follows to change the automatic switch-off time from 5 HRS to 2 HRS. Precondition: COFFEE READY is shown on the display. k T Keep the Rotary Switch pressed until MAINTENANCE appears. g T Turn the Rotary Switch until OFF AFTER 5 HRS is displayed. k T Press the Rotary Switch to enter the programme item. OFF AFTER 5 HRS g T Turn the Rotary Switch until OFF AFTER 2 HRS is displayed. k T Press the Rotary Switch to confirm the setting.
6 Permanent settings in programming mode g T Turn the Rotary Switch until CAPPU. RINSE NOW is displayed. k T Press the Rotary Switch to confirm the setting. CONFIRMED √ appears briefly on the display to confirm the setting. CAPPU. RINSE NOW g T Turn the Rotary Switch until RINSES EXIT is displayed. k T Press the Rotary Switch. RINSES g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode.
6 Permanent settings in programming mode g T Turn the Rotary Switch until SETTINGS EXIT is displayed. k T Press the Rotary Switch to exit the programme item. DISPLAY g T Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode. COFFEE READY Logo You can choose various logos which appear when the display is not used for other information.
6 Permanent settings in programming mode Language You set the language when you used the machine for the first time. You can choose among the following languages. Z German Z English Z French Z Italian Z Dutch Example: To change the language from ENGLISH to DEUTSCH, proceed as follows. Precondition: COFFEE READY is shown on the display. k T Keep the Rotary Switch pressed until MAINTENANCE is displayed. g T Turn the Rotary Switch until LANGUAGE ENGLISH is displayed.
6 Permanent settings in programming mode g T Turn the Rotary Switch until RENAME ABC... is displayed. k T Press the Rotary Switch to enter the programme item. RENAME PRODUCT NAME E The welcome text and closing can be selected by turning the Rotary Switch. k T Press the Rotary Switch to enter the programme item. PRODUCT NAME CHANGE k T Press the Rotary Switch. PRODUCT NAME / SELECT PRODUCT E Next select the button of the product which you would like to rename. No product is prepared during this procedure.
7 Maintenance 7 Maintenance Your IMPRESSA has the following integrated maintenance programmes: Z Rinse machine Z Filter change Z Clean machine Z Descale machine Z Rinse cappuccino nozzle Z Clean cappuccino nozzle E Clean or descale the machine or change the filter whenever the appropriate indicator lights up. Maintenance tips To ensure that you get many years’ reliable service out of your IMPRESSA and to guarantee the optimum coffee quality, the machine requires daily maintenance.
7 Maintenance Precondition: COFFEE READY is shown on the display. T Place a receptacle under the coffee spout. k T Keep the Rotary Switch pressed until MAINTENANCE appears. k T Press the Rotary Switch to enter the programme item. CAPPUCCINO CLEANING g T Turn the Rotary Switch until MACHINE RINSING appears. k T Press the Rotary Switch to initiate the rinse operation. RINSING Rinsing stops automatically and your IMPRESSA is then ready for use.
7 Maintenance c T Press the maintenance button. INSERT FILTER / PRESS BUTTON T Remove the water tank and empty it. T Open up the cartridge holder and remove the old CLARIS plus filter cartridge and the extension piece. T Fit the extension on top of a new CLARIS plus filter cartridge. T Insert the filter cartridge into the water tank, exerting slight pressure. T Close the cartridge holder. It will click into place audibly. T Fill the water tank with fresh, cold water and reinsert.
7 Maintenance g T Turn the Rotary Switch until FILTER CHANGE is displayed. k T Press the Rotary Switch. CHANGE TIME 2 MIN / START YES T Continue with the second prompt to take action (indicated by a T), as is described under ‘Replacement following a prompt’. Clean machine CAUTION After 220 coffee preparations or 80 switch-on rinses, the IMPRESSA will prompt you to clean it. If the wrong cleaning agent is used, the machine could be damaged and/or traces of detergent could be left behind in the water.
7 Maintenance PRESS BUTTON, the maintenance button c lights up. T Place a receptacle under the coffee spout and the cappuccino nozzle. c T Press the maintenance button. MACHINE IS CLEANING, water flows out of the coffee spout. The process is interrupted, ADD TABLET. T Open the cover of the bean container. T Open the cover of the filler funnel for pre-ground coffee. T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel and the cover of the bean container.
7 Maintenance Descale machine CAUTION The IMPRESSA builds up deposits of limescale over time and automatically prompts you to descale it when necessary. The degree of calcification depends on the degree of hardness of your water. If the descaling agent comes into contact with the skin or eyes, this can cause irritation. T Avoid contact with the skin or eyes. T Rinse the descaling agent off with clean water. Should you get any descaling agent in your eye, consult a doctor.
7 Maintenance E If you want to descale the machine at a later point in time, turn the Rotary Switch until DECALCIFYING / START NO is displayed. Exit the maintenance programme by pressing the Rotary Switch. The prompt ‘Descale machine’ remains on the display. c T Press the maintenance button. TRAY / GROUNDS EMPTY T Empty the drip tray and coffee grounds container and put them back into the machine. SOLVENT IN TANK T Remove the water tank and empty it.
7 Maintenance T Replace the cappuccino nozzle. T Place a receptacle under the hot water and coffee spout and the cappuccino nozzle. c T Press the maintenance button. MACHINE IS DECALCIFYING, water flows out of the hot water spout and the cappuccino nozzle. UNIT IS HEATING, RINSING water flows out of the coffee spout. The process stops automatically, TRAY / GROUNDS EMPTY. T Empty the drip tray and coffee grounds container and put them back into the machine. The descaling operation is now complete.
7 Maintenance Rinsing the cappuccino nozzle Each time milk has been prepared the IMPRESSA displays a prompt for cappuccino rinsing. It can be set in programming mode whether the rinsing prompt is displayed immediately or 10 minutes after preparation (refer to Chapter 6 ‘Permanent settings in programming mode – Rinses’). Rinsing the cappuccino nozzle after prompt Precondition: COFFEE READY / CAPPU. RINSING is shown on the display, the maintenance button c lights up.
7 Maintenance Starting cappuccino cleaning manually Precondition: COFFEE READY is shown on the display. k T Keep the Rotary Switch pressed until MAINTENANCE appears. k T Press the Rotary Switch to enter the programme item. CAPPUCCINO CLEANING k T Press the Rotary Switch. CLEANER FOR CAPPUCCINO / PRESS BUTTON T Pour 250 ml of fresh water into a container and add one capful (max. 15 ml) of Auto-Cappuccino Cleaner. T Immerse the milk pipe in the receptacle.
7 Maintenance Dismantling and rinsing the cappuccino nozzle Removing foreign objects T Carefully pull off the cappuccino nozzle. T Dismantle the cappuccino nozzle completely. T Rinse all the nozzle parts thoroughly under running water. T Reassemble the cappuccino nozzle and attach it once more to the connector. Even the highest-quality coffee beans can contain foreign objects. These can block the grinder. Q T Switch your machine off with the On/Off button.
7 Maintenance T Clean the bean container with a soft, dry cloth. T Fill the bean container with coffee beans, then close the aroma preservation cover and the bean container cover. The cleaning of the bean container is now complete. Descaling the water tank Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time. T Remove the water tank. T If you use a CLARIS plus filter cartridge, remove this.
7 Maintenance 72
8 CLARIS plus filter cartridge – Water for perfect coffee 8 CLARIS plus filter cartridge – Water for perfect coffee As fresh as from the spring Anyone who has ever drunk fresh spring water knows: There is a world of difference between the elixir of life in its natural form and the processed fluid that comes out of our taps. Very few of us have ready access to a spring. The answer to this is: CLARIS plus filter cartridge from JURA. It transforms the hardness of the mains water into pH-neutral water.
8 CLARIS plus filter cartridge – Water for perfect coffee Quality knows no compromises You can see it at work on your household appliances every day. Left to its own devices, scale can cause serious damage. Over time, scale is deposited on the heating elements, clogging the heating elements and pipes. Scale is also detrimental to the quality of your chosen drinks because, with the passage of time, the water will no longer be properly heated.
8 CLARIS plus filter cartridge – Water for perfect coffee Up-flow principle The water flows through the filter at a constant speed, disturbing the granulate and ensuring that it is used evenly. This system ensures that the filter is used to optimum effect. The remaining water in the tank is left untouched until the next cup of coffee is made. Easy to operate Inserting the CLARIS plus filter cartridge couldn‘t be easier.
8 CLARIS plus filter cartridge – Water for perfect coffee Pictures on the next few pages: 1 Water – always pleasant and freshly filtered. 2 CLARIS plus filter cartridges do not require any accessories and do not take up any extra space. They can be inserted directly into the water tank. 3 5 4 Water for perfect coffee specialities. The professional up-flow principle: Only the precise amount of water required for a given beverage is drawn in, and this is filtered directly before use.
1 2 3
4
5 6 7
9 ‘The milk makes the difference’ 9 ‘The milk makes the difference’ Coffee specialities are taking the entire planet by storm. Up until a few years ago, classics, such as Espresso and Café Crème were the most popular choices. Today, Cappuccino, Latte Macchiato & co. have well surpassed them. Trendy specialities with milk More and more often, one finds milk among the ingredients of the trendy specialities. It doesn‘t matter whether whole milk or skim milk is used.
10 Accessories and Service 10 Accessories and Service Extend your coffee horizon Coffee specialities made with milk are very fashionable these days. The One Touch cappuccino nozzle: The quickest, most direct and simple way to delve into the world of coffee and to revel in all its variety. Care products 2 Original JURA care products are optimally tailored to the maintenance programmes. You should therefore use only original JURA care products. Your IMPRESSA will thank you for it.
1 83
2 84
2 85
3 86
4 5 6 87
7 88
8 9 90
11 Messages on plain text display 11 Display messages Message Cause/Result Action TRAY EMPTY The drip tray is full. You cannot T Empty the drip tray. prepare any coffee products, hot water or milk products. WATER TANK FILL The water tank is empty. You cannot prepare any coffee products, hot water or milk products. T Fill the water tank (See Chapter 2, ‘Preparing and using for the first time – Filling the water tank’). GROUNDS EMPTY The coffee grounds container is full.
11 Messages on plain text display Message Cause/Result Action COFFEE READY / CLEAN After 220 preparations or 80 switch-on rinses, the IMPRESSA will prompt you to clean it. T Clean the machine (See Chapter 7, ‘Maintenance – Cleaning the machine’). COFFEE READY / CLEAN (flashes) After 250 preparations the IMPRESSA will prompt you to clean it. T Clean the machine (See Chapter 7, ‘Maintenance – Cleaning the machine’).
11 Messages on plain text display Message Cause/Result Action CLEANER FOR CAPPUCCINO / PRESS BUTTON The IMPRESSA prompts you to T Perform cappuccino cleaning (refer to Chapter 7 clean the cappuccino nozzle. ‘Maintenance – Cleaning the cappuccino nozzle’). BEANCOVER MISSING The beancover is not inserted correctly or is not inserted at all. You cannot prepare any coffee products, but you can prepare hot water or milk.
12 Troubleshooting 12 Troubleshooting Problem Cause/Result Action Grinder is making a very loud noise. There are foreign objects in the grinder. T Remove the foreign objects (see Chapter 7, ‘Maintenance – Removing foreign objects’). The frother does not produce enough milk foamor milk sprays from the cappuccino nozzle. The cappuccino nozzle is dirty. T Rinse and clean the cappuccino nozzle (see Chapter 7, ‘Maintenance – Cappuccino nozzle’). Coffee only comes out in drips when it is being prepared.
12 Troubleshooting Problem Cause/Result Action ERROR 2 is displayed. If the device was exposed to the cold for a long period of time, it is disabled from heating up due to safety reasons. T Warm up the device at room temperature. Other ERROR messages are displayed. – T Turn the IMPRESSA off at the power switch. Contact Customer Support in your country (see Chapter 16 ‘JURA contact details’). E If you have not been able to solve the problem, contact Customer Support in your country.
13 Transport and environmentally neutral disposal 13 Transport and environmentally neutral disposal Transport / Empty system Keep the packaging of your IMPRESSA. It should be used to protect the machine during transportation. In order to protect the IMPRESSA from frost during transportation, the system must be emptied. Precondition: The IMPRESSA must be switched off (standby). T Remove the water tank. T Place a receptacle under the hot water spout and below the cappuccino nozzle.
14 Technical data 14 Technical data Rating plate E The voltage and current vary according to the safety test. Please refer to the rating plate before connecting the device. The rating plate is located on the bottom of your IMPRESSA. The information shown on the rating plate has the following meaning: Z V AC = alternating current in volts Z W = power output in watts A This product complies with all applicable EU directives.
14 Technical data Technical data 98 Voltage AS 230 V AC, 50 Hz F 120 V AC, 60 Hz D 220 –240 V AC, 50 Hz G 220 V AC, 50 Hz Power 1350 W Safety test SDFG Energy Save No 23 Wh Energy Save Level 1 16 Wh Energy Save Level 2 14 Wh Pump pressure Static max. 15 bar Holding capacity of water tank 2.8 l Holding capacity of bean container 280 g Holding capacity of coffee grounds container Approx. 20 servings Cable length Approx. 1.1 m Weight 13.
14 Technical data 99
15 Key technologies 15 Key technologies and products Intelligent Pre Brew Aroma System (I.P.B.A.S.©). Perfect coffee is no accident. The Intelligent Pre Brew Aroma System© produces the very best in flavour from every coffee blend and roast. 1a The freshly ground coffee beans are delivered to the infusing cylinder as a powder from the grinder. 1b There it is optimally compressed. 1c Prior to brewing, the powder is moistened. The pores swell and the flavours are released.
1 1a 1b 1c 1d
2 IMPRESSA Z IMPRESSA S IMPRESSA J IMPRESSA F
IMPRESSA C IMPRESSA X IMPRESSA XF
3 4 5
16 JURA contact details 16 JURA contact details A China Shanghai HJ Coffee Co., Ltd. Australia Global Coffee Solutions Pty Ltd. Customer Service Phone +61 1300 552 883 Fax +61 0242 846 099 E-mail info@globalcoffee.com.au Opening Hours Monday to Friday 8:00 am – 5:00 pm Distributor Address/ Service Address Global Coffee Solutions Pty Ltd 5/77 Jardine Street Fairy Meadow NSW 2519 Customer Service Phone +86 21 62940690 ext.31 E-mail service@hjcoffee.
16 JURA contact details E Opening Hours Monday to Friday 9:00 am – 6:00 pm Saturday 9:00 am – 1:00 pm Distributor Address/ Service Address Pacific Coffee Company Ltd 701–704 Hollywood Center 233 Hollywood Road, Sheung Wan Estonia Infomelton OÜ Customer Service Phone +372 651 88 55 +372 651 88 50 E-mail lavazza@lavazza.ee Opening Hours Monday to Friday 09:00 – 17:00 Distributor Address/ Service Address Infomelton OÜ Weizenbergi 27 Tallinn 10150 I Iceland Karl K.
16 JURA contact details Israel Lithuania J.Feffer l.t.d. JSC Pretendentas Customer Service Phone +972 353 350 38 Fax +972 353 305 54 E-mail feffer-j@barak-online.net Customer Service Phone + 370 315 73442 Mobile +370 650 84779 E-mail alma@pretendentas.lt Opening Hours Sunday–Thursday 08:00 – 18:00 Friday 09:00 – 13:00 Opening Hours Monday to Friday 09:00 – 18:00 Distributor Address/ Service Address J.Feffer l.t.d. 9,Simtat Ma‘ale Hachoma Ind.
16 JURA contact details N Puerto Rico ProExpo CA Consultores S.A. New Zealand Euro Espresso Ltd. Customer Service Phone +64 9 277 1334 Fax +64 9 277 9375 E-mail info@euroespresso.co.nz Opening Hours Monday to Friday 8.30 am – 5:00 pm Distributor Address/ Service Address 6 Mepal Place, Manukau City, Auckland PO Box 76–342, Manukau City, Auckland 1730 Customer Service Phone +506 234 7404 Fax +506 253 5296 E-mail info@grupocapresso.com Distributor Address/ Service Address ProExpo CA Consultores S.
16 JURA contact details South Africa Turkey International Coffee Equipment CC John’s Coffee Customer Service Phone +27 11 708 2481 E-mail info@icesa.za.net Customer Service Opening Hours Monday to Friday 08.00 – 17.00 Saturday 08.00 – 13.00 Phone +90 216 420 2400 Fax +90 216 313 56 32 E-mail info@johnscoffee.com.
Index Index E Energy-save mode 51 Espresso 42 A Accessories 82 Adjusting grinder 23 Assessing and setting water hardness 22 Automatic switch-off 54 F Filter Change 61 Using and activating 21 Fineness of grind B Adjusting grinder 23 Bean container 8 Cleaning 70 Filling 19 C Cappuccino 42 Cappuccino nozzle Cleaning 68 Dismantling and rinsing 70 One Touch Cappuccino nozzle 8 One Touch cappuccino nozzle 16 Rinsing 68 Care products 82 CLARIS plus 73, 81 CLARIS plus filter cartridge First-time use 19 F
Index O S One Touch Cappuccino nozzle 8, 16 Safety 10 Service 82 Settings P Pre-ground coffee 45 Preparation Default settings in programming mode 48 Entering a default setting for the amount of water for a cup size 28 One-off settings before and during preparation 27 Water hardness 22 At the touch of a button 40 Cappuccino 42 Coffee 42 Espresso 42 Hot milk 46 Hot water 46 Latte macchiato 43 Pre-ground coffee 45 Ristretto 41 Special coffee 42 Setting up 18 Special coffee 42 Specialities 34 Trendy spec
Art. 67228/Z5/en/0708 Directives The machine complies with the following EU directives: Z 73/23/EEC of 19 February 1973, Low Voltage Directive including Amending Directive 93/68/EEC. Z 89/336/EEC of 3 May 1989, Electromagnetic Compatibility, including Amending Directive 92/31/EEC. Technical changes We reserve the right to make technical changes. The illustrations used in the IMPRESSA Z5 – Generation II Manual show the IMPRESSA Z5 – Generation II Alu model. Your IMPRESSA could incorporate minor changes.
