頂石雲端 CAPSTONE FIRE ALARM Residential Fire Alarm Sounder Installation Instruction
Contents 1. Product Information 1 2. Function Definition 2 3. Description of Installation Space Configuration Planning 3 4. How to avoid the improper installation position? 4 5. Looking for the best installation position 4 6. Test and Maintenance of the Residential Fire Alarm Sounder 5 7. Setup environment 6 8. Quick installation method 6 9. Installation Situation Description 8 10. APP Tutorial 9 10-1. Download Tutorial 9 10-2. Account Registration 10 10-3. Device Setting 11 10-4.
1. Product Information Name Residential Fire Alarm Sounder with Photoelectric/Constant Temperature Model CS-6000 Type Input Power Standby Battery Wire Parameters Photoelectric Two Types/Constant Temperature Voltage 110VAC/220VAC Current 45mA Frequency 50 / 60Hz Brand Model Specification Panasonic eneloop BK-3MCCE 1.2 VDC 2000mAh/AA Nickel-Hydrogen Self Discharging/Charging Battery Equipment Name CS-6000M NCC License No. CCAN20LP0100T6 Wireless Standard 802.11 b/g/n Frequency Range 2.
2. Function Definition 1. The residential alarm sounder is mainly powered by supply mains, and will not start until it is connected with supply mains after installing batteries. 2. Upload a group of document to the cloud about every 60 seconds. 3. When the smoke concentration/temperature reaches the alarm value, the alarm sound ("beep, beep, beep" continuously) and a red light flashes. 4. When the temperature reaches the alarm value, the early alarm sound ("beep ~” long sound) and a red light will be on. 5.
3. Description of Installation Space Configuration Planning It is recommended to install one residential fire alarm sounder on every floor and every separate compartment in the house to achieve the highest protection function. The stairwell is a passage for smoke circulation, so it is recommended to install one residential fire alarm sounder. If the length of walkway or room exceeds 10 meters, it is recommended to install more than one, and install the residential fire alarm sounder at the both ends.
4. How to avoid the improper installation position Improper installation position will delay the alarm time, and may also cause "false alarm", thus affecting the living quality. The following conditions should be avoided: 1. Please do not install in frequently smoky environments, such as poorly ventilated kitchens, fireplaces, incense burning halls, carpentry studios, and install constant-temperature alarm sounders as fire detection in the above areas. 2.
6. Test and Maintenance of the Residential Fire Alarm Sounder 1. Press the test button and hear the alarm sound and flashing red light to confirm the normal operation of the alarm sounder, and test it at least once per month. 2. The dirt on the surface of the residential fire alarm sounder can be wiped with a wrung wet cloth, but you should be careful that water drops cannot fall into the residential fire alarm sounder, and the battery should be removed before wiping. 3.
7. Setup environment Stable WiFi environment. Setup for supply 110VAC/220VAC power source position. Built-in AA Nickel-Hydrogen Charging Battery, please don't remove. 8. Quick installation method 1. Firstly, remove the base and fix it on the ceiling or wall. Gently press the bottom plate on the position to be installed, mark the screw location with a pencil, drill the fixed hole with the alignment mark of electric drill after removing the bottom plate, and drill into the plastic nail in the accessories.
2. Fasten the rechargeable battery of the accessories and press it into the battery slot at the back of the detector body, fix it in the battery slot, and then fix the battery cover plate with screws. 3. The supply mains wires can be installed on the ceiling or wall according to the requirements, and the wires can be pulled out from the center hole or the side hole of the bottom plate. And rotate the host machine on the base and finish installation.
9. Installation Situation Description 1. Undecorated/Light Steel Joist Ceiling (Cement, Iron plate, etc.) 1-1. Use the electric drill to make 2 holes at the installation position, insert plastic nylon anchor (plastic plug), fix the base with screws, and connect the 110VAC (or 220AC) power source to the base. After the residential fire alarm sounder is loaded with battery, lock it to the base, and then set the APP. 1-2.
10. APP Tutorial 10-1. Download Tutorial For mobile phone with Android OS, please search for "HF Alarm" in Google player or scan QRcode to download and install. For mobile phone with Ios, please search for "HF Alarm" in Apple Store or scan QRcode to download and install.
10-2. Account Registration 1.After installing APP, please click “Log-up” button 2.Enter email and password to start log up 3.Go to mail box to receive mail, confirm and enter 4 digit verification code 4.Verification is successful Log-up Enter Enter Account ID Email Please enter Email Enter password Please enter password Enter Verification code has been sent to the following mail box Verification is successful XXXXX@gmail.
10-3. Device Setting 1.When theresidential fire alarm sounder is powered on and press “Setting” key, Check APP and go to NextStep New-added device 2.Turn on *Wi-Fi searching“Capstone” network and connect Set up New-added device Enter password of “capstone_6adc4a” Cancel Please power on the residential fire alarm sounder and press “Setting” key 4.Connection is successful 3.
5.Enter the pre-connected Wi-Fi name and password of device to connect 6.Scan the QR-code at back of device, finish pairing 7-1.The new device name group can be selected according to the household unit 7-2.
8-1.Select space for installation 8-2.Add new space by yourself New-added device New-added device Select Select Living Room 9.Complete device setting 10.The homepage displays connected device status New-added device is completed Setting is Guest Normal New-added Main Bedroom Bathroom Confirm Kitchen Cancel Dining Room New-added space New-added space Confirm Confirm Congratulation Device has been successfully set. Capstone FireCloud Co.
10-4. Device Sharing Setting 1.Click option at right upper corner, Device Sharing Click the left menu 2.Click “Share Device”, and select the device to be shared. 3.
4.If you need to share multiple devices at one time, press and hold the devices to select multiple devices, and then press the following 5.Enter shared accounts, and press “send”, share invitation shall be sent.
6.For the sharing party that has not installed the device, click the device to share 7.
8.There has been receiving party of installed device, click option at right upper corner, click the left menu Device Sharing 9.
10-5. Edit Device 1.Click option at right upper corner 2.Click the left menu Edit Device/Group 4.Click “Edit”, select device to be edited or deleted 3.Click and Edit Device Group Edit Group Edit Device My Group Guest Normal Edit No.168 5F Disclaimer Edit Device/Group Device Sharing Instructio My Group Log out 4-2.Check circle, to delete device Edit Device No.168 5F Move delete Guest 168 Edit Device No.
10-6. Edit Group 1.Click option at right upper corner 2.Click the left menu Edit Device/Group 4-1.Click group name, “changing name” right upper shall bepopped up. 3.Click Edit Device Edit Device Edit My Group Guest Normal My Group Dele No Signal No.168 5F Disclaimer Edit Device/Group Device Sharing No.168 5F 4-1.Check the circle to delete the devices, and the devices in the group will beautomatically moved to the “Unclassified” group No.
10-7. Self-set Temperature Remind Setting 1.Click device to be adjusted 2. Click “Self-set Remind”, and click new-added self-set temperature Guest Room-No.168 5F Guest 3.Set temperature, message remind and new-add complete Guest Room-No.168 5F 4.If you want to delete and click at right upper corner, and check the Self-set Remind to be deleted Guest Room-No.
10-8. Notification Setting 1.Click option at right upper corner 2.Click the left menu Notification Setting 3.
10-9. Android System Instruction 1.To “Self-Start Management” to start permission. Self-Start Management Recent Installation Have Downloade Sound Preload Prohibiting software from self-starting, which can improve battery life and release memory. All Applications 2.Go to “Sound Notification” setting, to turn on alarm volume (or notification volume).
11. FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
