User's Manual

ManualsBrandsCAPSTONE INDUSTRIES ManualsElectronicssmart switch

Model: IPCO

Introduction

This product is a wireless Smart AC plug; with the built-in WIFI module, you can control the

socket power ON/OFF by using iOS/Android devices through our APP. You can also check the

power consumption, set a timer or scheduling the socket individually or by group all through our

APP.

Technical Specification

Input : 120V AC 60Hz 15A

Output: 120V AC 60Hz 15A

Instruction

Please read the following instructions step-by-step before using the product.

1.) You can search “Capstone HA” in APP Store or Google play to down load APP.

2.) Connect this product to wall socket.

2.1) Open the APP to connect our product.

2.2) Connect the used equipment to our product after wireless connection finishes.

2.3)You can control ON/OFF by smart phone or the power button on the product.

How to connect this product by APP

1) Open your smart phone, and connect your home WIFI.

2) Open APP, click NEXT

Summary of content (7 pages)

PAGE 1
Model: IPCO Introduction This product is a wireless Smart AC plug; with the built-in WIFI module, you can control the socket power ON/OFF by using iOS/Android devices through our APP. You can also check the power consumption, set a timer or scheduling the socket individually or by group all through our APP. Technical Specification Input : 120V AC 60Hz 15A Output: 120V AC 60Hz 15A Instruction Please read the following instructions step-by-step before using the product. 1.
PAGE 2
3) Add a new smart switch 4) Return to smart phone “Setting/wifi”, select “outlet xxxx”
PAGE 3
5) Click “NEXT”.
PAGE 4
7) Input your pass word. 8) Name the smart switch, click “Save”.
PAGE 5
9) Then you connect the smart switch to your smart phone successful. 10) Add another smart switch, please repeat step 2 to 9.
PAGE 6
How to restore factory setting Press the power button over 5 seconds. If you need connect to your smart phone again please repeat above steps. APP function 1) It supports remote control, if you outside, you can control your equipment by smartphone 2) It supports electric expenditure calculation 3) If user has more than one of this product, it supports group working function. You can control them with same function at the same time. 4) It supports checking the instance working power and the used energy.
PAGE 7
must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.