User's Manual

REPLACING THE BATTERY PACK

The Night Light is powered by a Li-ion 11.1V 2000mAh

rechargeable Battery Pack. To replace follow these steps.

WARNING: Consult a qualiﬁed electrician if you have any electrical questions.

WARNING: Before replacing Battery Pack disconnect the power by turning off the circuit breaker or by

removing fuse at fuse box.

1. Place Rocker Switch (F) in OFF position.

2. Remove Light Fixture (A) from Mounting Plate (B) by removing Mounting Plate Screws (AA) and disconnect

Capstone Quick Connectors (DD) and ground wires (Fig 7).

3. Locate Battery Pack Compartment (H) on back of Light Fixture (A) and open (Fig 8).

4. Replace with Li-ion 11.1V 2000mAh rechargeable battery pack. Reattach the battery pack wires using the snap-

in connector. Match the black and red wires with the xture wires. Place the exposed wire into the connector and

lock into place using the snap clamp (Fig 9).

5. Close Battery Compartment (H).

6. Reconnect Capstone Quick Connectors (DD) and ground wires (Fig 7).

7. Place Rocker Switch (F) in ON position to activate Night Light feature.

8. Align Light Fixture (A) in Mounting Plate (B) and secure with Mounting Plate Screws (AA).

Li-ion 11.1V 2000mAh

Battery Pack

Back side (A)

Fig 7

Fig 8

Fig 9