User's Guide
Settings
Customer Support 1-877-557-2227 63
Other Options
The Advanced Setup settings screen displays the current wireless network
settings of the CaptionCall phone and lets you change them if needed.
WARNING
You should not change any wireless network settings unless you have the
technical knowledge required to do so. Invalid wireless network settings may
prevent the CaptionCall phone from working properly.
To change wireless network settings:
1. Touch the SSID button. A list of available networks will be displayed in order
of signal strength. Select the wireless network you want to use from the list.
2. Touch the Network Type button and select the type of security used by the
wireless network you have selected.
3. Touch the Encryption button and select the type of encryption used by the
wireless network you have selected.
4. Touch the Network Key button and use the on-screen keyboard to enter the
password (key) required by the wireless network you have selected.
5. Touch the Save button to save the password.
6. Touch the Save button to save all changes. The CaptionCall phone will then
attempt to connect to the selected wireless network.
7. Look at the list of wireless networks on the Wireless settings screen. If
the name of the wireless network you congured is shown in green, your
wireless network settings changes are valid. If the name is shown in white,
this means there is no saved information for this SSID. If your changes are
invalid, the name will display with the word FAILED in orange.
You can also manually congure the DHCP settings for wireless networks. See
page 61 for instructions on manually conguring DHCP.