User's Manual

CH1 User Manual
11/13/19
13
4.4.3 LAN
 IPv4
IP Address - Enter the IP address of your router (factory default: 192.168.1.1).
Subnet Mask - An address code that determines the size of the network. Normally
use 255.255.255.0 as the subnet mask.
MAC Address - It needs to be written to the device while producing.
Turn on DHCP server - Enable or Disable the DHCP server. If you disable the
Server, you must have another DHCP server within your network or else you must
configure the address of your PC manually.
Start DHCP address range at - Specify an IP address for the DHCP server to start
with when assigning IP address. The default start address is 192.168.1.10.
DHCP lease time - The Lease Time is the amount of time a network user will be
allowed connection to the router with their current dynamic IP address. Enter the
amount of time in minutes and the user will be "leased" this dynamic IP address. After
the time is up, the user will be assigned a new dynamic IP address automatically.
 IPv6
When on, connected devices can make IPv6 connections to the Internet.