User manual

14
2.3 ADVANCED AUTO SWITCH ZOOM, PTZ, COPY KEY CONTROL & USB
INFORMATION
AUTO SWITCH : In the split screen mode, use the AUTO/SEQ key in the front panel to
enable auto switch function. To disable press AUTO/SEQ key again.
ZOOM : In the full screen mode, use ZOOM button on the front panel to perform ZOOM
function. Press ▲▼◄►, located on the front panel to move the zoom window.
PTZ : When camera supported PTZ function ,use PTZ button, located on the front panel,
to perform PTZ function. Press ▲▼◄► to select and change setup value.
Moreover, under the Quad Mode, press ►► button on the front panel will lead to
sequence mode and in Single Full Screen mode, press ►► button on the front
panel will enter to PTZ control. Press ►► button again will come out from PTZ
control. (Only in CDR 0410VE)
COPY : Within the playback mode, press COPY button to start backup record and press
“COPY” again to end backup. Minimum backup time 10sec.
Note: Add 10sec backup time to beginning of desired backup copy time
towards process time
2.4 CAMERA & MONITOR LOOPING
Here recommend link cameras by sequence to avoid unexpected image broken, from CH1,
CH2, CH3, CH4…….
2.5 ALARM
There are three types of alarms, that the system can be configured to handle. They are
Motion detection Alarm, External Alarm and Video Loss Alarm.
A. Motion detection Alarm and External Alarm:
When Motion detection or External Alarm is triggered, 5 possible actions can be
performed.
a. Changes recording speed as alarm recording speed.
b. Monitor will display corresponding full screen alarm channel, it will switch
automatic mode to manual mode if buttons pressing activity occurred in 5 seconds.
c. Relays can be activated by motion detection or external alarm .
d. External alarm will be recorded in the event list. Motion detection can be set to yes
or no.
e. The camera title will change to yellow when motion is triggered and display
icon too, icon will show up when external alarm is triggered.
B. Video Loss Alarm:
When Video Loss occurs, the icon will display. To remove icon, press/click on
any channel. Icon cannot be removed remotely.