User manual

22
D. PTZ CONTROLLER
Within live-viewing mode, click this button to get into the PTZ setup menu. User
can also use PTZ key on the front panel to perform this function. Moreover, user can
right-click the button of the mouse or press the PTZ key on the front panel again to
exit PTZ Setup.
NOTE： Only for camera’s supporting PTZ function from DVR.
PTZ CONTROL
/ / / / / / / Direction key
Zoom In/ Zoom Out
PTZ Preset
Press
button to entry PTZ preset point menu.
SAVE PRESET NUMBER: Press SET to save preset point number and its position.
GO TO PRESET NUMBER: Press SET to go to the setup preset point number position.
Note: Above is only possible if the connected PTZ Camera allows this mode of
activation from DVR