User manual

23
AUTOPAN Setup
Press button to entry AUTOPAN setup menu.
AUTOPAN START POINT SET: Press SET to save the start point of AUTOPAN.
AUTOPAN END POINT SET: Press SET to save the end point of AUTOPAN .
AUTOPAN SPEED: Press the ◄ or ►/ mouse wheel to change the autopan speed.
RUN AUTOPAN: Press SET to start AUTOPAN.
STOP AUTOPAN: Press SET to stop AUTOPAN.
AUTOPAN Setup Procedure:
1. Enter PTZ Control Window.
2. Move PTZ speed dome to desired scene to setup AUTOPAN START POINT.
3. Press “AUTO” icon to enter AUTOPAN SETUP.
4. Press the icon, this will save the AUTOPAN START POINT.
5. Exit by pressing either icons.
6. Move PTZ speed dome to desired scene to setup AUTOPAN END POINT.
7. Press “AUTO” icon to enter AUTOPAN SETUP.
8. Press the
icon, this will save the AUTOPAN END POINT.
9. Adjust desired AUTOPAN SPEED using the
icons.
At this point the AUTOPAN setup is complete.
Note: Above is only possible if the connected PTZ Camera allows this mode of
activation from DVR