User manual

3.6 ALARM SETUP

Press ▲ or ▼ to select items.

Press ◄ or ► to change values.

Press SET to see more options.

A. ALARM INPUT TRIGGER

Select N.C for “normal close” alarm input, or select N.O for “normal open” alarm

input.

B. ALARM DISPLAY MODE

Press ◄ or ►/ mouse wheel to change value for ALARM DISPLAY MODE with full

screen.

C. VIDEO LOSS DETECT

Press ◄ or ►/ mouse wheel to switch VIDEO LOSS ALARM ON or OFF.

D. EVENT LOG SETUP

Press SET to change value for MOTION EVENT / VIDEO LOSS EVENT to ON /

OFF.

E. BUZZER TIME SETUP

Press SET to set dwell time of BUZZER/ ALARM.

F. RELAY TIME SETUP

Press SET to set dwell time of RELAY.

3.7 HARD DISK MANAGEMENT SETUP

A. OVERWRITE MODE

Press ◄ or ► to change the value of OVERWRITE MODE in ON or OFF.

B. CAPACITY WARNING (When Overwrite Mode is OFF, Capacity Warning will

enable)

Press ◄ or ► to change value to 20/ 15/ 10 or 5% with non-overwrite mode. When

LEFT RATIO is below the setting, the buzzer will be activated.

Press ▲ or ▼ to select items.

Press ◄ or ► to change values.

Press SET to see more options.