User manual

36
K. MAIL SETUP
K-1. MOTION SETTING: Press◄ or ►/ mouse wheel to enable or disable motion
setting.
K-2. ALARM SETTING: Press◄ or ►/ mouse wheel to enable or disable alarm
setting.
K-3. MAIL SERVER: Press SET to fill in the IP address of Mail Server.
K-4. USERNAME: Press SET to fill in the username while login to the mail server.
K-5. PASSWORD: Press SET to fill in the password while login to the mail server.
K-6. SENDER’S MAIL: Press SET to fill in the sender’s account when send the mail
via this mail server.
K-7. RECEIVER’S MAIL: Press SET to fill in the receiver’s mail address.
K-8. BCC MAIL: Press SET to fill in the receiver’s mail address for Bcc Mail.
K-9. EVENT SUBJECT: The subject of this mail. (Default value is ALARM MAIL)
L. FTP SETUP
L-1. MOTION SETTING: Press◄ or ►/ mouse wheel to enable or disable motion
setting.
L-2. ALARM SETTING: Press◄ or ►/ mouse wheel to enable or disable alarm
setting.
L-3. FTP SERVER: Press SET to fill in the IP address of FTP Server.
L-4. USERNAME: Press SET to fill in the username while login to FTP.
L-5. PASSWORD: Press SET to fill in the password while login to FTP.
L-6. PORT: Press SET to fill in the port number. The default value is 21.
L-7. PATH: Press SET to fill in the path when using FTP.
M. DVR NAME
Press SET to change DVR name which will present via using IP Installer, Internet and
DVR CMS.