User manual

81
APPENDIX D: MESSAGE LIST
MESSAGE STATUS & INDICATION NOTE
DISK ACCESS ERROR! H.D.D. Data structure Un-normal.
Data does not record into DVR or bad sector on DVR H.D.D.
Please install another H.D.D. and perform the record again.
UPDATE FILE ERROR! Please re-download the update file and update again.
FIRMWARE UPGRADE
FAILED
Please reboot the DVR and upgrade the firmware. Please send
the DVR back to repair when DVR is not functioning.
MEDIA ACCESS FAIL! The USB file format is incorrect (Please format the pen drive to
FAT32) or Pen Drive is setup to ONLY READ mode (Please
uncheck ONLY READ mode) when reserve the data by using
Pen Drive. The data cannot be burn into CD/DVD disc. Please
change another CD/DVD disc and backup the file in CD/DVD
disc storage.
NO FILE! There is no upgrade file within Pen Drive or the name of
upgrade file does not correspond with DVR format. Please
adjust the upgrade file name based on the following information.
16CH -> UpdateR.bin
08CH -> Update8.bin
04CH -> Update4.bin
USB DEVICE NOT
FOUND
NO USB
Pen Drive undetected. Please Unplug the Pen Drive and plug it
again.
BACKUP START TIME
ERROR
Backup start time error.
BACKUPEND TIME
ERROR
Backup end time error.
DISK ERROR The data cannot be burn into CD/DVD disc. Please change
another CD/DVD disc to backup the file.
FAN FAILED Fan Error Warning.
NO LOG DATA No Events Record.
SCHEDULE RECORD The condition is caused by trying to stop recording when
perform the schedule record. Please setup the record to manual
mode and then stop the record.
PLEASE SELECT ONE
CAMERA
The message will be shown while using the ZOOM function
under split screen condition. Please switch the screen into full
screen mode and then operate the ZOOM function.