Specifications

ManualsBrandsCar audio systems ManualsGadgetsUSB-C20

Version 31.08.2011 USB-C20

usbLOGiC USB-AV-Player

USB-C20

For navigation systems

Mercedes Benz

Comand 2.0, Comand APS CD

and Comand APS 220

Product features

• USB-port for media up to 2 TB (2000GB)

• supports FAT32 and NTFS formatted media

• multi partition capable

• compatible with MP3, AVI, VOB, MOV, RMVB, JPG and many more

• last position memory

• integrated into and controllable by vehicle infotainment

• AV-input with IR-control channel

• control of after-market devices by OEM buttons, e.g. DVD-player, USB/iPod devices, …

• after-market rear-view camera input

• automatic switching to rear-view camera input (only from usbLOGiC mode)

• rear-view camera power (+12V max. 1A)

• rear-seat-entertainment AV-output

• optional remote control for full USB functions/rear-seat-entertainment

• power on remote out trigger signal (+12V max. 1A) to switch on connected devices

• video-in-motion

Summary of content (14 pages)

PAGE 1
usbLOGiC USB-AV-Player USB-C20 For navigation systems Mercedes Benz Comand 2.0, Comand APS CD and Comand APS 220 Product features • USB-port for media up to 2 TB (2000GB) • supports FAT32 and NTFS formatted media • multi partition capable • compatible with MP3, AVI, VOB, MOV, RMVB, JPG and many more • last position memory • integrated into and controllable by vehicle infotainment • AV-input with IR-control channel • control of after-market devices by OEM buttons, e.g.
PAGE 2
Contents 1. Prior to Installation 1.1. 1.2. 1.3. 1.3.1. 1.3.2. Delivery contents Check compatibility of vehicle and accessories Setting the dip switches of the USB-box USBC-M500 Automatic switching to rear-view camera Deactivating usbLOGiC AV-input 2. Connection schema 3. Installation 3.1. 3.2. 3.3. 3.4. 3.4.1. 3.4.2. 3.4.3. 3.4.4.
PAGE 3
Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades.
PAGE 4
1.2. Check compatibility of vehicle and accessories Requirements Vehicle Mercedes Benz C-Class (W203) til 04/2004, CL-Class (C215) from 09/2002 til 09/2003, CLK-Class (C208 W208) all years, CLK-Class (C209 W209) til 05/2004 , E-Class (W210) all years , G-Modell (W463) til 03/2007, ML-Class (W163) all jears, S-Class (W220) from 09/2002 til 09/2003, SL-Class (R230) til 06/2004 Navigation Comand 2.0, Comand APS CD Limitations Factory-TV-tuner Must NOT be installed.
PAGE 5
2. Connection schema Version 31.08.2011 USB-C20 Page Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead. 4 3.
PAGE 6
3.1. Connections to the Comand Place of installation is behind the Comand. Remove the head-unit from the dash-board. Remove shell from female 18pin AMP connector of C2C-MB20. Transfer pins 2 (pink), 11 (yellow) and 3 (black) from female 18pin AMP connector of C2C-MB20 to corresponding slots of female 18pin AMP connector of factory harness. If occupied remove and isolate factory wires (take notes before removing).
PAGE 7
3.2. Interconnecting USB-box and harnesses Plug harness C3C-AV into 6pin Molex of USB-box USBC-M500. Plug harness C2C-MB20 into 14pin Molex of USB-box USBC-M500. Page 6 Plug female 18pin AMP-connector of C2C-MB20 into male 18pin AMP-socket of USB-box USBC-M500. Version 31.08.
PAGE 8
3.3. USB and optional IR-remote control set Connect USB-connector of USB-installation socket USBC-EXT to USB-socket of USBbox USBC-M500 and install the USBC-EXT socket in a well accessible location, e.g. the glove-box. Make sure there is enough space to load USB-media. Installation socket for the connection of USB-media.
PAGE 9
3.4.1. AV-source The usbLOGiC has the possibility to connect and remotely control by navigation buttons a pre-programmed device. The device list in the device control table (appendix A) shows the pre-programmed remote channels and the related IR-remote cables STA-xxx which must be ordered separately for the control of the device. Using the respective STA-xxx IR-control cable, interconnect the yellow female 3pin AMP connector of harness C2C-MB20 and the IR-port of the AV-source.
PAGE 10
3.4.3. After-market rear-view camera Connect the video RCA of the after-market rear-view camera to female RCA connector R-CAM IN of USB-box USBC-M500. Connect the green wire of C2C-MB20 to the camera power supply (+12V max 1A) The green wire is high (+12V) when reverse gear is engaged. Note: Automatic switching to camera only works from usbLOGiC mode. 3.4.4. After-market rear-seat-entertainment Version 31.08.
PAGE 11
4. Operation 4.1. Activation of the video-in-motion function The video of the usbLOGiC is displayed also in motion. Note: On vehicles with previously installed factory TV-tuner an extra video-in-motion interface might be necessary. It is not possible to determine this prior to testing. 4.2. Selecting the usbLOGiC as current AV-source Push TV button of Comand to choose the usbLOGiC as current AV-source. 4.3.
PAGE 12
4.5. Button assignment table The button assignment table shows which functions of usbLOGiC and additionally connected devices can be executed by Comand buttons. Once USB or AV-input mode is activated, the Comand button in the left column will execute the function described in the corresponding device column. The function description equals the remote control buttons of the optional usbLOGiC remote control or the additional device. On the additional device the writing may vary (e.g. AV instead of Source).
PAGE 13
4.6. Picture settings By pressing the button 10, it is possible to switch between 4:3 and 16:9 picture format (Only possible on Comand APS CD/220). To enter the picture settings menu longpress button 13. The picture settings menu always starts with the brightness settings. The respective current picture value is displayed on the instrument panel. Press the right knob to change from brightness to colour and contrast (after contrast, the interface starts again with brightness).
PAGE 14
7. Technical Support Caraudio-Systems Vertriebs GmbH manufacturer/distribution Rheinhorststr. 22 D-67071 Ludwigshafen am Rhein NavLinkz GmbH corporate sales/tech dealer-support Eurotec-Ring 45 D-47445 Moers phone +49 180 3 907050 email support@caraudio-systems.de Page 13 Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ® of their corresponding legal owners. Version 31.08.