User Manual

13
Opel
Solution when the radio does not fit properly in the dashboard
If present, remove the iron bracket from your old radio, otherwise the new radio will enter the car
under too much tension. In addition, it is important that sufficient space is freed up for getting rid of
the cabling. Make sure that you do not press the screen to get the radio tight in the car, this can
cause a crack.
Solution when the radio fails / does not turn on
With the Opel Astra H and the Opel Corsa D, it is possible that the voltage to the radio is blocked. In
case of failure, we advise you to disconnect the battery pole (10min). Then it may be that the radio
turns back on in a normal way.
Mercedes
Radio will not turn on
Step 1: Check whether the can bus decoder is linked to the adapter plug.
Step 2: Find the red and orange wire that has a connector between them. It is possible that the
power supply runs via the can bus decoder or directly via the car plug. Often around the red orange
thread is a label with B1 / B2 or B1 or B2. First connect the two wires labeled B1/B2 to B1 and test if
this is the solution. If this is not the case, you can try B2. In almost all cases, your problem will now be
solved.
Step 3: If this is not the case, you can connect the red ACC wire that runs into the radio plug to a
switched power supply. Look at the general tips on how to pull this food.
Settings of an android car stereo
An Android car radio can be compared to an Android Smartphone / tablet. There are many
possibilities to set the radio to your liking. Just like with a smartphone/tablet, you can swipe through
the various menus in the radio. Through the points below we explain the most important settings.
What we recommend after the first time booting of the device.
When you connect to the device for the first time, we recommend that you update all applications in
the play store. You can do this by connecting the device to the internet, logging in to google and then
you can update applications via the play store. This ensures correct operation of the device and the
pre-installed applications.
Set date/time
To set the date/time, follow the steps below:
Go to settings system Choose date & time convert the switch automatic time zone. Then you can
scroll down and set the time zone.
Set language
To set the language, you can follow the steps below:
Go to settings – system – languages & input – click on the + add language and then drag the language
you want above the default language to complete the setting.
Create WIFI connection / hotspot link
To connect the radio to the Internet, you can follow the steps below: