User Manual

5
Glossary
Iso adapter plug: The plug you click between the car plug and the radio
Ready-made system: A system that is specifically made for a certain car brand/type. These systems
are supplied without a framework.
Key wires: These wires are specifically needed to connect to a steering wheel adapter lead (this is the
case with universal systems with a pass front). Our multimedia is supplied if your car supports it with
a can bus.
Contact power supply: 12-volt power supply that is only on the wire when the car is on contact.
When the car is off, there should be no power supply on it.
Ready-made system: A system that is specifically made for a certain car brand/type. These systems
are supplied with appropriate radio frame and connections.
Plug and Play: All our Android car stereos come with Plug and Play plugs.
ISO-power cable adapter plug: The plug you click between the car plug and the radio
B+ battery: 12V power supply that is only on the wire when the car is on contact. When the car
is off, there should be no power supply on it. Recognizable by the yellow color.
RCA cables: These are connections for video and audio for, for example, an amplifier, SUB woofer,
microphone, and aux input. These can be recognized by the colors red, white, yellow, and green.
Key wires: These wires are specifically needed to connect to a steering wheel adapter (CANBUS).
If you support car steering wheel control, the CANBUS comes with plug and Play connections.
4 Pin USB: The 4pin USB 2.0 supports mobile charging, data and video playback
6 Pin USB: The 6 Pin USB 3.0 supports mobile charging, data and video playback
GPS: The GPS is paired for GPS navigation from the multimedia
Radio connection: depending on the radio connection of your car, a connection plug is supplied.
Usually the old radio cable can be connected directly to the multimedia.
CANBUS: That's a black box that controls steering wheel control and controls functions like climate
control, door open signaling, etc. The CANBUS is connected between the plug and Play Power plug
and the multimedia.
RCA camera input: You need this connection for a reversing camera, recognizable by single
RCA plug in yellow. The yellow connection is for video reverse camera and the loose wire is for
back at reverse connection.