User guide

3. Settings
3.3.3 FACTORY MODE-UTIL2
③ After register, select “SRC” button
in OSD menu. Then you can see
confirmation window as shown
above. At the moment,
(If data is saved, DVD TYPE and
DTV TYPE will be changed to “USER”
automatically.)
FACTORY mode – Press ◀
◀◀
◀ button 2 seconds long on the remote control.
 UTIL2
UTIL2 UTIL2
UTIL2 –
––
– IR MEMORY
IR MEMORYIR MEMORY
IR MEMORY
Instruction> continued…
c. The values that you
registered will appear as green
text in the marked area on
pressing the button. And the
values will be saved
-17-
automatically.)
If you see “SUCCESS” on screen, the
data is saved clearly and you can
control DVD via touch screen. BUT,
you MUST change the option in
FACTORY-UTIL2-I_DRV REMOTE to
“USER”.
※ When touch the screen or Select PIP button in remote controller, you can
control DVD, DTV using remote control UI via touch screen or Jog shuttle
※ DVD(A/V1), DTV(A/V2) mode, Can see remote control UI
HDMI, A/V3 mode, Can see mode switching UI
- If you want to see mode switching UI in DVD, DTV mode, Select “SRC” button
values will be saved
automatically.
d. Register remain buttons’
value in OSD menu like the
above-mentioned.
www.car-solutions.com
[e-mail]
Car-Solutions.com