User manual

2.7.2 Remote controller button
15
Instruction> continued…
c. The values that you registered will appear as green
text in the marked area on pressing the button. And
the values will be saved automatically.
d. Register remain buttons’ value in OSD menu like
the above-mentioned.
③ After register, select “INPUT” in OSD menu and
press “OK”. Then you can see confirmation window
as shown above. At the moment, if you choose
“YES”, all the values that you entered will be saved.
If you select “NO”, the values won’t be saved.
(If data is saved, DVD TYPE and DMB TYPE will be
changed to “USER” automatically.)
If you see “SUCCESS” on screen, the data is saved
clearly and you can control DVD via touch screen.
BUT, you MUST change the option in
DVD(DMB)/UTIL/FACTORY to “USER”. (Refer to
page18.)
>>>
www.car-solutions.com
[e-mail]
Car-Solutions.com