Installation manual

2.4 OSD Buttons Activation

www.car-solutions.com

>>>

First of all, if you touch the screen in mode ”AV1”,

you can see the menu as shown left. And then if you

do NOT touch anything on the screen for 5 seconds

or longer; or if you touch the screen in the place

beyond menu, the menu will disappear.

At that time, if you choose “INPUT”, you can get out

of the menu and see the mode change menu.(left

picture)

Here is a picture of the mode change menu. If you

select the channel which you want, you will switch to

selected video source. (right picture)

OSD buttons for DVD

For DVD control via OSD menu installer shall connect DVD system to AV1 input and join “DVD IR” cable from video interface cables with

DVD IR receiver DATA cable.

OSD buttons for - DMB, NAVI

DVD, navigation menu is available in English or Chinese. You can change menu language by pushing “MENU” button on remote

controller.

As shown above, if you touch the screen in

mode ”AV2”, you can see the menu as shown left.

And then if you do NOT touch anything on the screen

for 5 seconds or longer; or if you touch the screen in

the place beyond menu, the menu will disappear.(left

picture)

Here is a picture of the mode change menu. If you

select the channel which you want, you will switch to

selected video source. (right picture)

Car Solutions