Installation manual

2.9.2 Remote Control Buttons
www.car-solutions.com
18
>>>
• Short press
Long press
<MMI Buttons setting>
- Select menu you would like to save in MMI Button Settings
mode (as shown at the left picture,.
1. If you select OK button of remote controller in OSD menu,
the marked area will blinks (as show n at the picture).
2. When the left marked point starts blinking, Press
“POWER” button of your remote controller.
3. As soon as the “Power” button is pressed, button value
will be displayed on the screen, it will be saved automatically.
4. Use the same procedure to save other buttons.
③ After programming select “INPUT” in OSD menu and
press “OK”. Then you can see confirmation window as
shown above. If you choose “YES”, all entered values will
be saved.
If you select “NO”, the values won’t be saved.
If data is saved, DVD TYPE and DMB TYPE will be
changed to “USER” automatically.)
If you see “SUCCESS” caption on screen, the data is
saved and you can control DVD via touch screen.
HOWEVER, you MUST change the option in
DVD(DMB)/UTIL/FACTORY to “USER”. (Refer to
page19.)
Car Solutions