Excalibur Vibrating Pinball OPERATING MANUAL www.ExcaliburElectronics.com Model No.
C ongratulations on your purchase of Excalibur E l e c t r o n i c s ’ Vi b r a t i n g P i n b a l l ! To g e t t h e most fun from your new game, please read this operating manual thoroughly, paying special attention to safety and care instructions. Installing Batteries Your game requires 2 AA batteries (not included). To install the batteries, carefully turn the game over so that the top side is face-down on a soft surface. Use a small Phillips screwdriver to remove the screw.
Playing Vibrating Pinball on the score LCD. After you have made your selection, press START to begin your game. Getting started To begin playing, flip up the automatic scoreboard so that you can see the score LCD at the top of the unit. Then press ON to turn on the game. Next press LEFT FLIPPER to select either Game 1 or Game 2. The game selection will be displayed on the upper right of the pinball LCD.
BATTERY INFORMATION • CAUTION: Batteries should be removed and replaced by adults only. • Turn unit off when installing batteries. • Your Pinball game uses 2 AA batteries, not included. • Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. • Do not mix old and new batteries. • Do not use rechargeable batteries. • Remove exhausted batteries from the unit. • Do not short circuit battery terminals. • Remove batteries and store them in a cool, dry place when not in use.
ably in the original carton, and send it prepaid, and adequately insured. Include a letter, detailing the complaint and including your daytime telephone number, inside the shipping carton. If your warranty has expired and you want an estimated fee for service, write to the above address, specifying the model and the problem. PLEASE DO NOT SEND YOUR UNIT WITHOUT RECEIVING AN ESTIMATE FOR SERVICING. WE CANNOT STORE YOUR UNIT! We make you think.
