Manualshelf

Installation guide

ManualsBrandsCarat ManualsRAID controllers3ware 9650SE-24M8
101102103104105106107108109110
Chapter 2. CLI Syntax Reference
96 3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.2
00 00 00 00 00 00 C4 32 00 C7 C7 01 00 00 00 00
00 00 C5 12 00 C8 C8 00 00 00 00 00 00 00 C6 10
00 C8 C8 00 00 00 00 00 00 00 C7 3E 00 C8 C8 01
00 00 00 00 00 00 C8 09 00 C8 C8 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 82 00 74 13 01 7B
03 00 01 00 02 3C 06 00 00 00 00 00 00 00 00 00
00 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
/cx/px show status
The /cx/px show shatus command shows the status of the drive attached to
the specified port. (Definitions of the drive statuses are available in the 3ware
SATA+SAS RAID Controller Card Software User Guide, Version 10.2.)
Example:
//localhost> /c0/p5 show status
/c0/p5 Status = OK
Note: This command only returns the status pertaining to the drive of the
specified port. Its intended use is not for determining the status of a drive
relative to a unit (for that, please use “/cx/ux show” on page 72).
/cx/px show all
The /cx/px show all command shows all port-related attributes: status, model,
serial, firmware, capacity, and SMART (for SATA drives).
Example for SATA drive:
//localhost> /c3/p3 show all
/c3/p3 Status = OK
/c3/p3 Model = ST3750640AS
/c3/p3 Firmware Version = 3.AAK
/c3/p3 Serial = 3QD0RGX6
/c3/p3 Capacity = 698.63 GB (1465149168 Blocks)
/c3/p3 WWN = 0000000000000000
/c3/p3 Drive Type = SATA