User guide

S1000-DAB User Guide
STARTING UP THE SYSTEM
1. Turn on the S1000-DAB car adaptor.
2. S1000-DAB will perform a Full Scan of DAB stations automatically.
3. Press FM on the S1000-DAB and the screen will show the current FM transmitting
frequency, make a note of that number. The default is 87.6MHz.
4. Turn on your in-car audio system.
5. Switch the car radio’s FM frequency to match to S1000-DAB FM transmitting
frequency setting.
6. Enable the AF function on your car radio if it is equipped and skip to step 8 (Consult
your car radio manual or the car dealer if your car radio is RDS compatible, has the
AF feature, and how to enable AF feature).
7. If your car radio is not RDS compatible or does not have AF feature, do the following
to change S1000DAB’s FMTX mode to AutoScan instead of the default AutoTune.
 Press MENU and then press ◄ or ► until the screen shows《 System Setup 》.
 Press INFO/ENTER, and then press ◄ or ► until the screen shows 《 FMTX
Mode 》.
 Press INFO/ENTER, and then press ◄ or ► until the screen shows 《 FMTX
AutoScan 》.
 Press INFO/ENTER, the function of AutoScan is now enabled and the
S1000-DAB is operating in the AutoScan mode.
8. Listen to the DAB stations. Please refer to USING DIGITAL RADIO ADAPTOR
section for the system operation.
9. If you are using AutoScan function from step 6 and you are experiencing noise on
the listening DAB station, please refer to USING THE MENU CONTROL section, To
enable AutoScan, or To Set the FM Transmitting Frequency Setting to manually switch
to another FM frequency:
7