User guide

S1000-DAB User Guide
USING DIGITAL RADIO ADAPTOR
To Listen to the DAB Stations
To select and listen to a DAB station, steps through the stations on the station list one
by one and in alphabetical order.
 Press ◄ or ► to select the desired DAB station, the screen will show
《 Station List ; station name 》if the station is available or《 Station List ; ?station
name 》if the station is not available.
 Press INFO/ENTER to start tuning the station selected. The screen will show
《 station name ; Tuning … 》. If you do not press INFO/ENTER within 10
seconds, the system will revert to the original screen automatically. At the end of
tuning, the screen will show 《 station name ; scrolling text 》 which are the station
name and the scrolling text information broadcasted by the station.
Note:
When the DAB station you selected is not available, the screen will show
《 station name ; Unavailable 》. There will be no audio output from the
S1000-DAB.
To Display Station’s information
The S1000-DAB provides certain information about the currently listening station such
as station’s signal strength, quality, etc. This information can be displayed thru the
INFO/ENTER key.
 Each time you press INFO/ENTER while listening to a DAB station, the screen will
cycle through station’s information below on the second row of the display.
《 scrolling text 》 - Scrolling text information from the station
《 ■■■■■□ 》 - Signal strength indicator
《 type 》 - Programme type, [No PTY] if none.
《 name 》 - Multiplexor name
《 id frequency 》 - Multiplexor ID and its frequency (eg. 10C 213.360MHz)
《 Signal Qty : x 》 - Signal quality with value x
《 bit-rate / format 》- Data bit-rate and format (eg. 128kbps / MP2)
《 time 》 - Broadcast time from the station (eg.19:10:16)
《 date 》 - Broadcast date from the station (27-10-2009)
8