User guide
S1000-DAB User Guide
USING THE MENU CONTROL
To Scan the DAB Stations
This function scans the desired DAB band and searches for all DAB stations available
in the area where your car is presently located. Stations found as a result of the search
are added to the station list.
There are three Scan types available in the S1000-DAB: Quick, Full, and Manual tune.
When a Quick scan is performed, the S1000-DAB will scan only the part of Band III
(from channel 9A to channel 13F). In a Full scan, the S1000-DAB will scan the entire
Band III from channel 5A to channel 13F. You can choose to scan a type in your
current location in order to minimize the amount of time needed to search your local
DAB stations. In a Manual tune, S1000-DAB tunes only the selected channel.
1. To select Quick and Full Scan, and start Scanning DAB Stations
Press MENU and then ◄ or ► until the screen shows the desired Scan type:
《 Quick Scan 》or《 Full Scan 》.
Press INFO/ENTER to begin scanning for DAB stations in the selected channel
range.
Note:
You will need to perform Scan function when you first install the S1000-DAB
in your car. You may also need to perform a Scan function if you drive your
car to a new area where the broadcasting DAB stations are not on the current
station list.
During Scan DAB Stations, the first line of the screen will show 《Scanning
channel N 》, in which channel shows the current channel being scanned, and
N indicates how many stations have been detected so far, and the second
line shows the scanning progress bar.
While selecting the Scan type, the screen will revert to the station currently
being listened to if you do not press INFO/ENTER within 10 seconds.
It will take a few minutes to perform the scan function.
While the Scan operation is in process, you can press INFO/ENTER at any
time to stop Scan function and revert to listening to the currently selected
station.
When the Quick or Full Scan DAB Stations process is finished:
a. If the DAB Station List is not empty before scanning then after completion of
DAB Scan, the S1000-DAB will revert to playing the last DAB station
automatically.
b. If the DAB Station List is empty before scanning, the S1000-DAB will tune in
the first station of the new DAB Station List resulted from this DAB Scan.
11