User guide

S1000-DAB User Guide

radio is activated, your car radio will tune to an unused FM frequency automatically

when you drive into an area where the original FM frequency for DAB is no longer

available. You do not need to do To Enable AutoScan or To Set the FM Transmitting

Frequency Setting in the sections below, to switch to an unused FM transmitting

frequency.

Do the following for the first time you use your car radio’s AF feature and S1000-DAB

Setting on S1000-DAB

 Press MENU and then press ◄ or ► until the screen shows《 System Setup 》.

 Press INFO/ENTER, and then press ◄ or ► until the screen shows 《 FMTX

Mode 》.

 Press INFO/ENTER, and then press ◄ or ► until the screen shows 《 FMTX

AutoTune 》.

 Press INFO/ENTER The function of AutoTune is now enabled and the

S1000-DAB is operating in the AutoTune mode.

 Press

FM and the screen will show the current FM transmitting frequency,

make a note of that number.

Setting on Car Radio

 Enable the Alternative Frequency feature of your car radio (Consult your car

radio manual or the car dealer if your car radio is RDS compatible, has the AF

feature, and how to enable AF feature).

 Tune the car radio to the same FM frequency that matches with S1000DAB’s

current FM transmitting frequency.

Note:

If this is the first time you use the S1000-DAB In-Car Digital Radio Adaptor, it

is necessary to perform a Scan function as described in section To Scan the

DAB Stations.

If your car radio is not RDS compatible or does not have AF feature, the

AutoTune function must not be enabled, and refer to the section below To

Enable AutoScan or To Set the FM Transmitting Frequency Setting.

The system default is AutoTune mode enabled.

Some car radios with AF function may still have issues working fully with

‘Autotune’. When your S1000DAB identifies a need to switch FM

transmission frequency this will usually force the car radio to change FM

frequency automatically in most cases. If 《 Re-tune to ; Frequency 》

appears on the S1000DAB display, but your car radio does not automatically

re-tune, please re-tune your car radio to the frequency shown on the

S1000-DAB display manually.

The new frequency will be displayed for 30 seconds after your S1000DAB