User guide

S1000-DAB User Guide
had found it. To see the new FM transmission frequency on screen after this
time press the FM button.
While in AutoTune mode, if the FM transmitting frequency for S1000-DAB and
the Car Radio listening Frequency is out of sync, do the following in sequence
to re-sync:
Operating on Car Radio
 Press the FM preset of your car radio to the frequency 87.6MHz if you
have previously saved for DAB reception. Otherwise, tune the car radio
to FM frequency 87.6MHz manually.
Operating on S1000-DAB
 Press FM
the screen will show the current FM Transmitting Frequency.
 Press preset keys 1 and the screen will show the FM frequency saved
in memory, this should be 87.6MHz.
 Press INFO/ENTER to set this frequency as the FM transmitting
frequency of S1000-DAB, and S1000-DAB will use this new frequency
to transmit the signal.
ATTENTION
The S1000-DAB comes with the AutoTune function. In order to use this function,
your car radio must be RDS compatible, has the AF (alternative frequency) feature,
and AF must be enabled. Please consult your car radio manual or the car dealer
for these requirements before using this function.
While working with the AutoTune function, the possible factors that could affect its
normal operation are:
1. The FM sensitivity varies among car radios and the sensitivity can affect
AutoTune’s performance.
2. The algorithm implemented in each car radio’s AF feature varies and this can
affect radio’s FM frequency tuning when triggered by AutoTune.
If AutoTune’s function is unable to function normally due to above reasons, you can
try the following solutions:
1. Increase S1000-DAB’s FM Transmitting Power Level, please refer to
S1000-DAB user guide for the instruction.
2. If increasing the FM Transmitting Power Level does not resolve it, you can turn
off AutoTune function and use AutoScan function instead, please refer to
S1000-DAB user guide for the instruction. The AutoScan function automatically
scans for 3 useable FM frequencies; you will need to choose a new frequency
from the scanned frequencies to set and synchronize it between S1000-DAB
and car radio manually.
14