User guide

S1000-DAB User Guide

press INFO/ENTER to cancel while the screen is showing 《 Factory Reset? ;

<No> Yes 》.

1. The screen will show《 Restarting… 》to indicate that factory reset is in

progress.

2. The system will perform a Full scan of DAB stations automatically after the

factory reset is completed. You must switch the car radio to FM 87.6MHz to

continue DAB listening

Note:

Factory reset will erase all previous system’s settings and set them to default.

To Upgrade Software

This function is used by the maintenance personnel only, to upgrade the existing

S1000-DAB software to a new version.

To Display Software Version

This function allows you to display the current software version of your S1000-DAB.

 Press MENU and then ◄ or ► until the screen shows《 System Setup 》.

 Press INFO/ENTER, and then press ◄ or ► until the screen shows

《 SW Version 》.

 Press INFO/ENTER, the screen will show the current software version

number Vx.x.x.x《 SW Version; Vx.x.x.x 》.