User guide

S1000-DAB User Guide

INSTALLATION

1. Assemble the cradle

 Assemble the cradle by hooking up the stand into the holder

2. Secure the S1000-DAB unit into the cradle

 Place the S1000-DAB unit on the holder

 Line up the cradle’s tab to S1000-DAB, then pull the tab in until you hear it clicks

in to the holder

3. Mount the cradle.

 If you prefer to secure the S1000-DB unit on the dashboard, please remove the

protective tape on the bottom of the Plain Plate and affix it to the desired location

 Remove the protective tape on the bottom of the cradle

 Attach the cradle to a desired location on the windshield or to the Plain Plate and

secure it by pulling down the cradle’s lever

 Loosen the cradle’s knob, adjust the orientation of the unit as necessary, and

then fasten the knob

4. Connect the supplied cigarette-lighter power plug to the DC jack located on the side

panel of S1000-DAB. Please refer to the section on OVERVIEW OF CONTROLS

AND CONNECTORS for the side view of the adaptor

5. Plug the cigarette-lighter power plug into the cigarette lighter

6. Install the external antenna on the roof of your car and then plug the end of the

antenna cable to the aerial jack located on the side panel of S1000-DAB