Assembly Manual

Tighten the (8) scres (four on the left and four on
right) that secure the X-Ais rail to the Y-ais plates.
While tightening, pa attention to the Y-ais plates
and ensure the continue to touch the end plates
as ou tighten the scres.
Tighten the front eight (8) scres (four on the left
and four on right) that secure the Y-Ais Rails to the
front End Plate.
Slide the Gantr all the a to the back of the
Shapeoko XXL so the left and right Y-Ais Carriages
are touching the End Plates as shon in Figure X.
Tighten the back eight (8) scres (four on the left
and four on right) that secure the Y-Ais Rails to the
rear End Plate.