Assembly Manual
NOE: f ou ere to install the -carriage
backards (ith the scres on the right), the -
ais ill operate in reerse.
Turning the -carriage oer, secure the spindle
mount b installing (2) of the M516mm scres
through the back of the plate and into the rear of
the spindle mount.
Tighten these scres don at this point in the
assembl. Using some thread locker ill help keep
them secure and reduce the chance of ibration
causing the scres to become loose.
Z-Carriage
Flip the Z Carriage and orient the Z Carriage so it is
as shon in the image belo.