Instruction Manual

ManualsBrandsCarbolite ManualsControl panel2116 used for over temperature protection

MC03 – 1.04

Operating Instructions

Overtemperature Controller

Eurotherm 2132 and 2116

See also the main manual for the furnace, oven or other

product to which the controller is fitted.

CONTENTS

section page

1 Description 2

2 Basic Operating Instructions 2

3 Audible Alarm 3

4 Navigation Diagram 3

Summary of content (4 pages)

PAGE 1
Operating Instructions Overtemperature Controller Eurotherm 2132 and 2116 CONTENTS section 1 2 3 4 page Description Basic Operating Instructions Audible Alarm Navigation Diagram 2 2 3 3 See also the main manual for the furnace, oven or other product to which the controller is fitted. MC03 – 1.
PAGE 2
132/2116 Overtemperature Controller 1 DESCRIPTION 1.1 2132 or 2116 Controller The models 2132 and 2116 overtemperature controllers are made by Eurotherm, and are fitted by Carbolite configured for immediate use. The two models are the same except for the size. They are digital instruments with a latching alarm, requiring no additional panel controls. The 2132/2116 features easy setting of overtemperature setpoint, and reading of current temperature at the overtemperature sensor.
PAGE 3
2132/2116 Overtemperature Controller 2.3 Basic Operation Use Down  and Up  to alter the overtemperature setpoint. This should normally be set a little above the maximum working temperature (say 15°C above). The unit is supplied at 15°C above the furnace or oven maximum working temperature. Press Scroll  to view the present temperature as seen by the overtemperature controller. Press it twice, because the first press shows the temperature units (°C). 2.
PAGE 4
For preventive maintenance, repair and calibration of all Furnace and Oven products, please contact: Carbolite Engineering Services Telephone: +44 (0)1433 624242 Fax: +44 (0)1433 624243 Email: service@carbolite.com Carbolite, Parsons Lane, Hope, Hope Valley, S33 6RB, England. Telephone: +44 (0)1433 620011 Fax: +44 (0)1433 621198 E-mail: info@carbolite.com MC03 – 1.