Owner manual

Programming

MC22-GB-V1.00

4.8 Running a program

Ensure the controller is in the basic operator mode parameter OP.b.

Press function  to show nPrG lower display and the program number in the upper display.

Press the Up  or Down  to choose the program number.

Press to enter to select the required program number.

Table below shows the key presses to run a program

Operation

Action

Indication

To RUN a program

Press for more than

1.5 seconds.

Run indicator = On

To HOLD a

program

Press for more than

1.5 seconds.

Run indicator = On

Lower Display = HOLD

To CANCEL a

program

Press for more than

5 seconds

Run indicator = Off

Program Ended

Run indicator = Off

Lower Display = END

To RESET after a

program has

completed

Press or or

 or  once

Run indicator = Off