Specifications

special conversion bellhousings

SPECIAL CONVERSION BELLHOUSINGS

NV4500 BELLHOUSING ADAPTERS TO GM ENGINES:

The NV4500 transmission has become a popular combination when installing a Chevy engine into a Jeep. Since the NV4500 is

offered from General Motors or Dodge, the stock GM & Dodge bellhousing is not always compatible with the original Jeep clutch

linkage. Depending on the model NV4500 you obtain, the full bellhousings we offer have provisions to utilize your stock hydraulic

or mechanical clutch linkage. When using an adapter plate, additional clutch linkage items will be necessary. If using one of our

bellhousings with a Vortec engine, you may be limited on clutch linkage due to the exhaust manifolds.

GM NV4500:

P/N 712577 - GM NV4500 (1993-1995) to GM block, full bellhousing (11” clutch recommended)

P/N 712576 - GM NV4500 (1996 & up) to GM block, full bellhousing (11” clutch recommended)

(Both these bellhousings come with a Chevy release arm and proper bellhousing boot)

DODGE NV4500:

P/N 712550 - Dodge NV4500 to GM 5.125” indexed adapter plate

(This kit requires the use of a stock GM bellhousing. Clutch bracket Part No. 716638 may be necessary to aid with a

mechanical clutch linkage connection.)

(Full bellhousing P/N 712576 can be used with a Dodge NV4500 by installing a new input shaft, P/N 52-0221)

Clutch components for both GM & Dodge NV4500 kits:

P/N CF165552 - 11” Pressure Plate

P/N 383735 - 11” Clutch Disc

P/N N1430 - Release Bearing (w/ full bhsg.)

P/N N1714 - Release Bearing (w/ adapter plate)

CLUTCH ALIGNMENT TOOLS:

P/N 716228 - CLUTCH TOOL 1-1/8” 10 SPLINE .590 PILOT TIP

P/N 716229 - CLUTCH TOOL 1-1/16” 10 SPLINE .670 PILOT TIP

P/N 716230 - CLUTCH TOOL 1” 14 SPLINE .590 PILOT TIP

P/N 716231 - CLUTCH TOOL 1-1/8” 21 SPLINE .460 PILOT TIP

P/N 716232 - CLUTCH TOOL 1-1/8” 10 SPLINE .750 PILOT TIP