Specifications

P/N 713088
We offer Gen. III mounts and adapters designed to couple
to any earlier GM automatic or manual transmission.
Ford 302 Bolt-in Mounts for CJ7 & YJ Wranglers: This cradle motor mount bolts directly to your CJ7 & YJ Jeep. By simply
removing your stock motor mounts, this mount will properly position your 302 for header, fan & radiator clearance. No welding is
required on P/N 713131. Part No. 713130 requires the frame brackets to be welded to the frame. Most applications will not require
driveline modifications. Note: We do not offer any conversion headers to fit with these motor mounts. Stock manifolds are your best
choice.
P/N 713130 - Ford 302 to 1987-95 YJ Wrangler
P/N 713131 - Ford 302 to 1987-95 YJ Wrangler (replacing 4 cyl.)
Advance Adapters “Off Road” Mounts: We now carry “Off Road” series motor mounts for the
hard core 4-wheel enthusiast. These mounts are a weld-in design that use a horizontal neoprene
isolator. These mounts are designed to handle the abuse of the roughest type of trail
P/N 713206 - Jeep YJ & TJ Stock Rubber Mount Replacement
Jeep Cherokee XJ Mounts: We manufacture motor mounts for installing a Chevy V6 or V8. Our mounts require the original
motor mounts to be removed from the frame rails. The engine mounts will set the Chevy engines at a height that will provide minimum
hood clearance. Engines equipped with throttle body fuel injection, will need to modify the air cleaner.
A suspension lift is mandatory in order to have the proper suspension clearance. Failure to use a suspension lift will not provide
the proper engine clearance which will cause both engine and suspension damage. The engine mounts are designed for a direct
bolt in conversion. The stabilizer assembly on the driver's side will need to be reinstalled to the new engine mounts.
P/N 713109 - Jeep Cherokee to Chevy V8 mounts
P/N 713117 - Jeep Cherokee to Chevy V6 mounts
115
engine conversions / motor mounts (1987 & newer)
1991 YJ conversion with AA SYE kit installed. Photo
courtesy of Todd Smith of Nacogdoches, TX.
Dodge Hemi TJ Conversion parts:
The Dodge truck engine is the most preferred engine with the
545RFE automatic transmission. If a non 4WD transmission
is obtained, the tailhousing can be changed without disas-
sembling the transmission. Jeep TJ’s from 1997 to 2000 will
not be able to use the stock instrument cluster. The Jeep in-
strument cluster from 2001-2006 4 & 6 cylinder engines works
fine with the Hemi engines.
The Jeep TJ must have at least 1”
of body lift before starting and we recommend a 3” or greater
suspension lift with adjustable bump stops. This motor mount
is designed to work with a 1997-2003 4 cylinder steering bracket,
Part# 52058855. If your replacing a 6 cylinder, you will need this
Jeep part number.
P/N 716601 Hemi exhaust manifolds
P/N 716688-AA Hemi with automatic transmission
P/N 716688-AB Hemi with manual transmission
P/N 716607 A/C lines kit
P/N 716609 Gas Pedal bracket