Specifications

5
JEEP TRANSFER CASE ADAPTER SELECTION CHART
NOTES:
(1) OUTPUT SHAFT MAY NEED TO BE SHORTENED OR A 1” SPACER
ADAPTER MAY NEED TO BE USED (P/N 51-0404)
(2) THIS KIT USES A NEW FULL MAIN SHAFT
(3) THIS KIT USES A SPUD SHAFT
(4) THIS KIT FITS SMALL HOLE T/Cs
(5) THIS KIT FITS LARGE HOLE T/Cs
(6) TRANSMISSION CASE NEEDS MACHINE WORK
(7) ADAPTER LENGTH IS PART OF TRANS. MEASUREMENT
(8) THIS ADAPTER WILL ALSO NEED AA P/N 716221
(9) THESE KITS COME WITH A NEW T/C INPUT GEAR
(10) ADAPTERS FOR CHEROKEES REQUIRE FLOOR & SHIFTER MODS.
(11) THESE ADAPTERS REQUIRE A NEW BEARING & RETAINER
(12) NEW TRANSMISSION OUTPUT SHAFT MUST BE INSTALLED
(13) USES STOCK 2WD OUTPUT SHAFT
(14) USES 15 TOOTH JEEP GEAR
(15) USES STOCK 4WD OUTPUT SHAFT
(16) LONG WHEEL BASED VEHICLES ONLY
(17) SCOUT DANA 300 T/C
(18) JEEP QUADRA-TRAC T/C
(19) COMPLETE TRANSMISSION TO TRANSFER CASE ADAPTER
(20) THESE ADAPTERS ARE SUPPLIED WITH A TRANSFER CASE BRKT.
(21) THESE TRANSMISSIONS ARE SIDE SHIFTED. BELOW ARE THE SHIFTER
BRACKETS, ROD KITS & HURST SHIFTER WE OFFER:
715501 MUNCIE BRACKET
715502 T10 SHIFTER BRACKET
715502-NS SUPER T-10 SHFT.BRKT.
715506 SAGINAW & FORD T&C SHFT.BRKT.
715625 MUNCIE ROD KIT (MALE STUDS)
715626 MUNCIE ROD KIT (FEMALE STUDS)
715627 T-10 ROD KIT
(22) THIS KIT USES A STOCK 700R4 4WD OUTPUT SHAFT. IF YOUR 4L60E IS A 4WD TRANNY, YOU CAN USE
THIS STOCK SHAFT, BUT IT WILL REQUIRE A DIFFERENT CLAMP ON RELUCTOR THAN THE ONE
PROVIDED IN THE KIT. THAT PART NO. IS 716074
(23) FOR USE ON A 21 SPLINE TRANSMISSION
(24) FOR USE ON A 23 SPLINE TRANSMISSION
(25) STOCK OUTPUT SHAFT MUST BE SHORTENED. KITS USE THE 31 TOOTH PORTION OF OUTPUT SHAFT
(26) THIS KIT WILL NOT WORK ON A NP208 TRANSFER CASE.
(27) KIT 50-0231 IS A 29 SPLINE INPUT GEAR THAT FITS NP231 T/Cs
(28) THIS KIT WORKS IN CONJUNCTION WITH THE ADAPTER LISTED UNDER DODGE 23 SPL. NV4500
(29) THE CASTING IN THIS KIT ONLY HAS ONE ROTATION AVAILABLE
(30) THE AODE WILL REQUIRE SOME ADDITIONAL PARTS FROM FORD
(31) THESE KITS FIT THE NP231 T/C ONLY. TRANSFER CASES UP TO 1994 USE A DIFFERENT INPUT GEAR
THAN THE 1995 & LATER MODEL NP231. KITS ENDING WITH A “4” FIT THE EARLY MODEL; KITS ENDING
WITH “5”, LATE MODEL.
715627-NS SUPER T-10 ROD KIT
715628 SAGINAW ROD KIT
715631 FORD T&C ROD KIT
715600 HURST SHIFTER
715643 JEEP T/C KNOBS
715644 OFFSET HANDLE
JEEP TRANSFER CASE
SELECTION CHART
GM , FORD
AUTOMATIC
TRANSMISSIONS
GM TH350 2WD TRANS.
21.5" CASE LENGTH NOTE 12
GM TH350 4WD TRANS.
21.5" CASE LENGTH
GM TH400 2 & 4WD TRANS.
24.25" CASE LENGTH
GM 4L80 & 4L80E 4SP TRANS.
MUST USE GM SHAFT 8661596 OR 24204289
GM 700R / 4L60 O/D 4 SPEED
23.375" CASE LENGTH 2WD OR 4WD
GM 700R / 4L60 O/D 4 SPEED
4WD TRANSMISSION ONLY
GM 4L60E 2 & 4WD TRANS.
700R/4L60 With VSS NOTE 12
GM 4L60E 2 & 4WD TRANS.
W / REMOVABLE BELLHOUSING
GM 4L60E 4WD TRANS. 4.10”
AMC 1980 & NEWER TRANS.
FORD C4 3 SPEED TRANS.
FORD AOD EARLY 4SP TRANS.
1987 & EARLIER 20.5" CASE LENGTH
FORD AOD LATE & AODE 4 SP
1988 & UP 20.5" CASE LENGTH NOTE 30
FORD C6 3 SP. TRANS.
20" CASE LENGTH
GM 4L60E (HEX PAT) ATLAS T/C
DANA 18/20
6 SPLINE
1941-79
JEEP AND
SCOUTS
NOTE 11
50-3000
1.85" ADAP.
50-3001
1.85" ADAP.
50-1300 (12)
50-0500 (13,14)
50-6905 (16)
6.25" ADAP. (13)
50-8601 (23)
50-8602 (24)
50-2900
5" ADAP. (12)
50-3300
5" ADAP. (12)
DANA 18
10 SPLINE
1969-71
(T14 3SP)
NOTE 11
50-3100
1.85" ADAP.
50-3101
1.85" ADAP.
50-1400
2.87"ADAP. (12)
DANA 300
23 SPLINE
1980-86
NP208 T/C
84-86 DOWNSIZE
CHEROKEE
50-6300
3.65" ADAP.
50-6304
3.65" ADAP.
50-6400 (12)
50-6404 (13)
4.25" ADAPTERS
50-0401(1,9)
4.25" ADAP.
50-6303
3.65" ADAP. (12)
50-6309
3.65" ADAP. (15,26)
50-0404
4.65" ADAP.
50-0432
4.1” ADAP. (15)
50-0432
50-3021 (23)
50-8603 (24)
50-8100 (1)
6.25" ADAP. (12)
50-2902
6.37" ADAP. (12)
50-2901
6.37" ADAP. (12)
50-9925
.75" ADAP. (1, 9,15)
NP T/C
FLUSH 23
1987-06
(999/904 &
NV3550)
50-6300
3.65" ADAP.
50-6802
1.5" ADAP.
50-6304 3.65"
50-6802(12)
50-6804/5
(9,15,31) 1.5”
50-6402(1)
1.2" ADAP. (12)
50-9102
1.5" ADAP. (12)
50-9104/5
2.5" (9,15,31)
50-0402
3.65" ADAP.
50-0430
3" ADAP. (19)
50-0434/5
50-8100(1)
6.25"ADAP. (12)
50-2902
6.37"ADAP. (12)
50-2901
6.37"ADAP. (12)
NP T/C
LONG 23
1989-99
(AX15)
50-6307
3.65" ADAP.
50-6802
1.5" ADAP.
50-6308 3.65"
50-6802(12)
50-6804/5
(9,15,31) 1.5”
50-6403
4.2" ADAP. (12)
50-6402
1.2" ADAP. (12)
50-9102
1.5" ADAP. (12)
50-9104/5
2.5" (9,15,31)
50-0402
3.65" ADAP.
50-0430
3" ADAP. (19)
50-0434/5
50-8100
6.25" ADAP.(12)
NP T/C
FLUSH 21
1987-02
(AX4/AX5
UP TO 1996)
SOME AW4
50-6301
3.65" ADAP.
50-6801
1.5" ADAP.
50-6302 3.65"
50-6801(12)
50-6804/5
(9,15,31) 1.5”
50-6401(1)
1.2" ADAP. (12)
50-9103
1.5" ADAP. (12)
50-9104/5
2.5" (9,15,31)
50-0403
3.65" ADAP.
50-0431
3" ADAP. (19)
50-0434/5
NP T/C
LONG 21
1987-89
PEUGEOT
(AX5 1997 &
NEWER)
50-6305
3.65" ADAP.
50-6801
1.5" ADAP.
50-6306 3.65"
50-6801(12)
50-6804/5
(9,15,31) 1.5”
50-6401
1.2" ADAP. (12)
50-9103
1.5" ADAP. (12)
50-9104/5
2.5" (9,15,31)
50-0403
3.65" ADAP.
50-0431
3" ADAP. (19)
50-0434/5
SCOUT
DANA 300
23 SPL.
(SCOUT 727) & JEEP
QUADRA-TRAC
10 SPL.
50-3102
1.85" ADAP. (17)
50-3103
1.85" ADAP. (17)
50-1401 (17)
2.87" ADAP. (12)
50-2501 (18)
50-9300 for an ATLAS 2 SPEED & 50-9305 for an ATLAS 4 SPEED
C4 / ATLAS (50-2903 Shorty) or (50-2905 Shorty 300M)