Specifications

60
STEERING COMPONENTS:
Although we manufacture and sell complete kits for Saginaw steering conversions, we do offer the individual components.
P/N 716810 - Stock Jeep column bushing
P/N 716812 - Tie rod clamp
P/N 716814 - Spud shaft clamp
P/N 716816 - Manual pitman arm
P/N 716817 - Power pitman arm
P/N 716819 - Center socket tie rod end
P/N 716820 - Left hand thread tie rod end
P/N 716821 - Right hand thread tie rod end
P/N 716823 - Jeep column mounting plate
P/N 716824 - Jeep frame enclosures
P/N 716826 - Manual steering box mounting plate
P/N 716829 - Jeep tie rod 22-1/2”
P/N 716830 - Jeep tie rod 35-1/2”
(custom tie rods can be made for longer lengths)
P/N 716832 - Manual box mounting plate gusset
P/N 716834-30 - Spud shaft .730” dia. x 30T (manual & power)
P/N 716834-36 - Spud shaft .730” dia. x 36T (manual)
P/N 716835 - Spud shaft .800” dia. x 36T (power)
P/N 716837 - Jeep (Spicer) steering shaft 32”
P/N 716838 - Power steering mounting plate
P/N 716843 - Universal Joint 1” DD X 7/8”
P/N 716844 - Universal Joint 3/4”DD X .800 36 Spline
P/N 716845 - Universal Joint 1” DD X .3/4 - 36 Spline
P/N 716846 - Universal Joint 1” DD X .800 36 Spline
P/N 716847 - Jeep column shaft 7/8” x 3/4” DD
P/N 716848 - Universal Joint 3/4” x 1”-48 GM
P/N 716849 - Universal Joint 3/4 DD x 1” DD
SAGINAW POWER STEERING BOXES & PUMPS
Both Power & Manual boxes can be found in the 1960s & early 1970 GM cars or Jeep vehicles 1972 & newer. We also carry new
power boxes & pumps which are as follows.
We stock Saginaw power steering boxes from PSC and the TRITON. These steering boxes are ideal for the offroad enthusiast
that uses their vehicle as a daily driver. These units use a large piston and have a 16:1 turning ratio. The valving is designed for
a more firm and precise steering effort. This gives you more stability and control at highway speeds, and less oversteer offroad.
These units also help stabilize larger tires giving the vehicle a more stable feel on the highway. The PSC boxes are new and the
Triton boxes are rebuilt.
P/N 716881-P -PSC Saginaw power steering box with o-ring fittings
(.730 dia., 36 spline input shaft)
P/N 716882 - Triton Saginaw power steering box with o-ring fittings
(.730 dia., 30 spline input shaft)
We also offer a complement power steering pump from PSC. These
pumps work well when combined with the steering boxes mentioned
above. Larger cam packed with a larger rotor and vanes enables
these pumps to flow 3.4 gallons per minute, and produce 1500 psi.
The custom ported housing makes for less flow restriction, allowing
the pump to run stronger and cooler.
P/N 716885-P -Power steering pump w/ o-ring fitting, (does not
include pulley)
P/N 716886-P -Power steering pump w/ o-ring fitting and remote
reservoir, (does not include pulley)
P/N 716887-P -Power steering pressure hose kit for o-ring box
P/N 716888-P -Power steering return hose kit for o-ring box
P/N 716889-P -Power steering heat sink cooler kit
saginaw steering conversions (1941-79)
P/N 716850 - Universal Joint 3/4” DD x 3/4” - 36
P/N 716851 - Universal Joint 3/4” DD X 3/4” DD
P/N 716852 - Univ. Joint 3/4”-36 x 3/4” - 36
P/N 716853 - Universal Joint 3/4” DD x 3/4” - 30
P/N 716854 - Universal Joint 1” DD X 3/4” - 30
P/N 716860 - Steering shaft support bushing
P/N 716862 - Slip yoke steering shaft assembly
P/N 716863 - Slip steering shaft (no yokes)