Specifications

88
engine conversions / motor mounts (1980-86)
Once the engine has been selected, you will now need engine mounts. We offer several
combinations that will fit Ford, Chevy, Dodge, and Buick blocks. On most Ford and Chevy
applications, we standardize our mounts by using a special dual rubber donut, locked together
with special hardened bolts. This combination offers a positive means of securing the engine
for the most severe offroad conditions.
Most of our mounts are universal and can be adjusted to accommodate the best possible
engine location, while others are very specific and offer no alternate for changes. Our universal
Chevy and Ford side mounts are the most popular style for Jeep engine conversions. The
mounts are furnished so that they can be either welded or bolted into position, and are fully
adjustable so that the engine can be offset.
The universal mounts are now available in two styles; one for the Jeep universals, and one for the wider framed vehicles that will
fit up to 30.500" frames. In the Buick V6 category, we also offer a universal Buick V6 engine mount that utilize our double donut design
and is fully adjustable, similar to the Chevy and Ford engine mounts. This mount is Part No. 713011, and does not require the
use of the original Buick V6 rubbers.
In conjunction with all engine mounts, you will need to use a rear crossmember mount. This is usually the same mount with a new
location adjusted to the new engine position. Two mounting points are all that is ever required with most installations. This will
allow for plenty of engine flexibility and will eliminate transmission and engine vibrations.
We have been doing engine conversions for over 30 years . We’ve learned the hard way to count only on top-quality & proven design
installations. Our mounts are secured with a 5/8” diameter bolt between the engine brace and frame bracket. No rubber vulcanization
failure will let you down. To assure that you have the premier engine mounts that we offer, make sure our name is on the box. Do
not accept look-a-like takeoffs. We are the “4-Wheel Drive Experts” and have the quality to prove it.
Universal Motor Mounts: The universal mounts we manufacture are a high quality mounting system. The “L” brackets in these
kits are made out of 3/8” material and designed to handle any style of driving. These universal mounts allow for lateral and vertical
placement in the frame rail to maximize you drivetrain fit. The installation of these mounts will require the removal of you stock engine
mounts.
Chevy V8:
P/N 713007 - 1972-1986 Jeep universal and Jeep Wagons/Trucks Chevy V8 motor mounts
P/N 713005 - 1972-1986 Jeep universal and Jeep Wagons/Trucks Chevy V8 LT1 motor mounts
P/N 713088 - 1976-1986 Jeep CJ7 Chevy V8 Gen III & LS1 motor mounts
Ford V8:
P/N 713006 - 1972-1986 Jeep universal and Jeep Wagons/Trucks Ford small block V8 motor mounts
Buick V6:
P/N 713011 - 1972-1986 Jeep universal and Jeep Wagons/Trucks Buick V6 motor mounts
Dodge V8:
P/N 713095 - 1972-1986 Jeep universal and Jeep Wagons/Trucks Dodge V8 (318/360) motor mounts
Body Lifts
P/N 714454 -
Jeep 80-86 1” body lift