Specifications

P/N 713202

P/N 713204

P/N 713089

P/N 713088

P/N 713088-P

713089 passenger side mount.

engine conversions / motor mounts (1980-86)

ADDITIONAL JEEP MOUNTS

Stock Rubber Support Motor Mounts: We also offer motor mounts designed to utilize

the stock engine rubber mounts. These type of engine mounts are a good alternative to

the universal type if you need to replace a rubber support. Most auto parts stores can

supply you with a stock rubber support. We offer only two mounting systems this way;

one for the Chevy block and one for the AMC V8 engines.

P/N 713089 - 1976-1986 Jeep CJ7 bolt-in Chevy V8 motor mounts

P/N 713120 - 1980-1986 Jeep universal and Jeep Wagons/Trucks

AMC V8 (304/360/401) motor mounts

Chevy LS1 Blocks and Vortec Generation III Universal Mounts: We offer a universal weld-in mount. Part No. 713088

is a weld-in mount that uses a double donut rubber insulator. This mount should not be used

in a Jeep TJ. These mounts will interfere with the Generation III LS1 stock manifolds.

We also offer a mount plate that adapts the square bolt pattern to a triangular bolt pattern.

This plate positions the triangular bolt pattern in the same block

location as that of the early GM mount. This mount will work with

most stock GM configurations. P/N 713088-P

Ford 302 Bolt-in Mounts for CJ7 & YJ Wranglers: This cradle motor mount bolts directly to your CJ7 & YJ Jeep. By simply

removing your stock motor mounts, this mount will properly position your 302 for header, fan & radiator clearance. No welding is

required on P/N 713131 & 713132. Part No. 713130 requires the frame brackets to be welded to the frame. Most applications will

not require driveline modifications. Note: We do not offer any conversion headers to fit with these motor mounts. Stock manifolds

are your best choice.

P/N 713130 - Ford 302 to 1987-95 YJ Wrangler

P/N 713131 - Ford 302 to 1987-95 YJ Wrangler (replacing 4 cyl.)

P/N 713132 - Ford 302 to 1980-86 CJ7

Advance Adapters “Off Road” Mounts: We now carry “Off Road” series motor mounts for the hard core 4-wheel enthusiast.

These mounts are a weld-in design that use a horizontal neoprene isolator. These mounts are designed to handle the abuse of

the roughest type of trail.

P/N 713200 - CJ5 & CJ7 GM V8 Mounts

P/N 713202 - CJ5 & CJ7 AMC V8 Mounts

P/N 713204 - CJ5 & CJ7 Small Block Ford Mounts