Specifications

P/N 717038
91
jeep exhaust (1980-86)
STOCK MANIFOLDS:
If stock manifolds are being used on a Chevy small block, a rear dump, close-fitting manifold off of a 1982 & newer low performance
car is a good option. On vehicles that are smog exempt (depending on your vehicle year or state laws), the early Chevy ram horn
(centerdump) manifolds are great for most conversions.
Chevy V6 applications can use manifolds off of a 1978 Malibu Classic. For non-smog legal vehicles, manifolds off of a 1980 Monte
Carlo fit the best.
HEADERS:
Our header flanges are 3/8” thick and all of our primary tubes are constructed with 16 gauge tubing with a 2-1/2” 3 bolt collector ring.
Each design is available in either a commercial chrome finish or a non-plated version, ready for your painting or custom coating.
NOTE: Our headers are not designed to fit Chevy small blocks with angle port heads.
Our written guarantee states that if the headers do not fit your engine conversion exactly as you see fit, then simply return them
for a full refund. You will only be responsible for the freight charges. We do not warranty the chrome plating on our exhaust
systems, and the use of aftermarket header wrap products will void the header warranty.
Thirty-four years of continual
fine tuning and adjustments have made the Advance Adapters headers a choice for all engine conversion installations.
SMALL BLOCK CHEVY HEADERS: The Chevy headers we offer come complete with header flange gaskets, header bolts,
collector rings for the exhaust shop, and collector gaskets. All headers can be ordered in a chrome finish or a non plated finish by
adding a (NP) to the numbers listed below.
P/N 717038 - Fender well header that fits
Jeep CJ7 1976-1986
P/N 717010 - Inside the frame header that fits 1941-1986 Jeep Wagons
P/N 717011 - Inside the frame header that fits 1941-1979 center dump Jeep universal
SPECIAL HEADERS: We now offer universal headers like our 717011 headers that work with angle plug and
D-port heads.
P/N 717015 - Inside the frame header fits blocks with a std port head and angle plugs.
P/N 717016 - Inside the frame header fits D-port heads with angle plugs.
CHEVY 3.8 & 4.3 V6 HEADERS: These Chevy V6 headers we offer come complete with header flange gaskets, header bolts,
exhaust clamps for the exhaust shop. All headers can be ordered in a chrome finish or a non plated finish by adding a (NP) to the
numbers listed below. (1-1/2” primary tubes)
P/N 717056 - Inside the frame header that fits
1980-1986 rear dump Jeep universal
GEN III CHEVY V8 HEADERS: The Chevy Gen III headers are welded to a 3/8” steel flange These headers use the stock
flange gasket and metric bolts. We provide two collector rings for the exhaust shop and the collector gaskets. All headers can be
ordered in a chrome finish or a non plated finish by adding a (NP) to the numbers listed below.
P/N 717040 - Fender well header that fits
Jeep CJ 1976-1986
P/N 717043 - Inside the frame header that fits Jeep CJ7 1976-1986 (1-1/2” primary tubes)
BUICK V6 HEADERS: The Buick headers we offer come complete with header flange gaskets, header bolts, collector rings for
the exhaust shop, and the collector gaskets. All headers can be ordered in a chrome finish or a non plated finish by adding a (NP)
to the numbers listed below. (1-1/2” primary tubes)
P/N 717042 - Fender well header that fits
Jeep CJ7 1976-1986
SMALL BLOCK FORD HEADERS: The Ford small block headers we offer come complete with header flange gaskets, header
bolts, collector rings for the exhaust shop, and the collector gaskets. All headers can be ordered in a chrome finish or a non plated
finish by adding a (NP) to the numbers listed below. (1-1/2” primary tubes)
P/N 717034 - Fender well header that fits
Jeep CJ5 & CJ7 1972-1986
P/N 717012 - Inside the frame header that fits 1941-1979 center dump Jeep universal