Datasheet
Carclo Technical Plastics 103 Buckingham Ave, Slough, Berkshire, SL1 4PF ENGLAND
Tel: +44 (0)1753 575011 Fax: +44 (0)1753 811359
Page 1
10.0MM FROSTED NARROW ARRAY
Status Production
Part no. 10511
Drawing no. 60528
Product type Assembly
Type Array
Pieces 1
Diameter 10.0
Beam Frosted Narrow
Flange Yes
Files Customer drawing
(PDF)
Customer 3D model
(.igs)
LEDs & Performances Eff. FWHM Cd/lm Spot Cross-section Files
Lumileds Luxeon Rebel Cool White 85.0% 22 4.4 10511_Rebel_White_250408.ies
Osram SSL 80 degree Oslon Ultra White 87.3% 22.6 5.1
10511_Oslon_wht_250408.ldt
10511_Oslon_wht_250408.ies
SSC Z5 Triple Cool White 84.7% 19.2 6.9 10511_Seoul_Z5_triple_pure_white_250810.ies
Carclo Technical Plastics endeavours to continuously improve and renew its products; for this reason the technical data and contents of this
catalogue may undergo variations without prior notice. For correct and up to date information, Carclo suggest using the Opticselect tool on our
website http://www.carclo-optics.com.
Copyright © Carclo 2010
General Instruction – Optics & Holders
Handling instructions
●
Do not handle or install lenses without wearing gloves, skin oils may damage the lens or the light transmission.
●
Clean lenses with a mild soap and water and dry with a clean soft cloth.
●
Do not use any commercial solvents on lenses.
●
Mount holders with low Odour epoxies and allow time for them to out gas to stop lenses fogging.
Disclaimer – Optics & Holders
Please note that flow lines, weld lines, surface scratches and small black or white inclusions within the lenses are acceptable if the optical
performance of the lens is within the specification described below:
For all optics except Rippled and Frosted;
●
FWHM = Datasheet Value +/-10%.
For all Rippled and Frosted Optics;
●
FWHM = Datasheet Value +/-20%
For all Optics;
●
Efficiency = Datasheet Value +infinity / -10%
The yellowing / browning of polycarbonate lenses and holders can occur due to the natural ageing process and exposure to heat and UV and as
