User's Guide

3
Card Access InHome™ Mini Remote User’s Guide
ring of the Mini Remote, located on the remote bottom, and attaches to your
key ring.
Maintenance
Battery Installation
The Mini Remote is designed to maximize the
life of your batteries, though actual battery life
will depend on usage and environment. The
Mini Remote also includes LED indicators for
low battery levels. When your Mini Remote
LED blinks yellow or red twice after a button
push, your batteries are low and it’s time for
you to replace them. In the event the LED
remains red and the buttons cease to respond,
the batteries do not have sufcient power for
the remote to operate.
1. Remove the end cap by pulling
outward.
2. Remove the screw.
3. Open the case.
4. Replace the batteries.
(Polarities (+ and -) are marked on the
center divider).
Left battery: Positive (+) down
Right battery: Positive (+) up
making the buttons inactive
and preventing accidental
event execution. To activate
the buttons, slide the hold
switch out (to the left).
Lanyard ring
The Mini Remote lanyard
threads through the lanyard
< Hold OFF Hold ON >