User guide

ManualsBrandsCardio Theater ManualsHome AudioxTV900

www.argaudio.com

Fitness Entertainment Solutions

900 MHz Analog Receiver

Manual and User Guide

ARG-OM-012 Rev B

Summary of content (5 pages)

PAGE 1
Fitness Entertainment Solutions 900 MHz Analog Receiver Manual and User Guide ARG-OM-012 Rev B Audio Resource Group, Inc. • 405 Main Ave W, Unit 4G • West Fargo, ND 58078 • ©2013 Audio Resource Group, Inc. • All Rights Reserved • www.argaudio.
PAGE 2
CONTROL FUNCTIONS: The buttons on the receiver perform the functions as detailed below: 1. 2. 3. 4. 5. CHANNEL UP Button CHANNEL DOWN Button VOLUME UP Button VOLUME DOWN Button MUTE Button 6. 7. 8. 9. 10. SET Button SCAN Button MEMO Button C-SAFE Port Auto Power ON/OFF and 3.5 mm Stereo Audio Jack MOUNTING INSTRUCTIONS: The ARG 900MHz receiver is a universal unit designed to be compatible with most makes and models of cardio equipment. To mount the Receiver: 1. 2. 3. 4.
PAGE 3
OPERATING INSTRUCTIONS: POWER ON/OFF: The receiver is powered on and off by inserting the headphone plug into the headphone jack. When you plug the headphones in, the receiver will turn on. When you unplug the headphones, the receiver will turn off after a few seconds. SETTING UP AND PROGRAMMING THE CHANNELS: The receiver has six “groups” of frequencies that are pre-programmed to channel numbers that correspond to the frequency/channel pairs used by the various entertainment/fitness equipment manufacturers.
PAGE 4
When the auto-scan is complete, you are ready to assign preset channel numbers to the transmitter frequencies being broadcast. This process is similar to and done for the same reason you pre-set car radio stations as it allows for quick access to the channels you use without having to scan through the ones you don’t. The large number on the left side of the display is the channel number. The smaller numbers on the right side of the display is the frequency the receiver is tuned to. 1. 2. 3. 4.
PAGE 5
HEADPHONE JACK REPLACEMENT: Because it is subject to heavy use, it is normal for the contacts in the headphone jack assembly to wear out over time. The 900MHz receiver is equipped with a replaceable headphone jack module to address this wear without replacing the entire unit. Under ideal conditions, the headphone jack is rated to last roughly 6,000 plug insertions and removals (cycles).